Dissertation > Excellent graduate degree dissertation topics show

The Thickness Effect of Metal Armor with Poerstructure Penetrating by Small Caliber Projectile

Author: GuoLing
Tutor: DuYuLei; WangZhiHui
School: Nanjing University of Technology and Engineering
Course: Materials Engineering
Keywords: Pore structure metal armor Armor piercing incendiary(API) Protection efficiency Thickness effect Stacking factor Numerical simulation
CLC: TJ413.2
Type: Master's thesis
Year: 2012
Downloads: 22
Quote: 0
Read: Download Dissertation

Abstract


Pore structure is well developed in the armor steel material with through holes under certain condition. Pore structure metal armor shows superior armor pierced-resistance to traditional armor steel with its unique architectural feature. In the present work, penetration method is employed on the study of thickness effect of pore structure metal armor to minor caliber armor-piercing bullet. The target plate is shotted in angle a, using12.7mm armor-piercing incendiary. Armor steel A with thickness of4mm,6mm,8mm and10mm is used in thickness effect test. In addition, armor steel B and C with thickness of6mm are also studied thickness effect test. Stack test is carried out on double layer of4mm armor steel A and double layer of5mm armor steel A. Experimental results demonstrated that protection efficiency Nc of pore structure metal armor first increased then reduced with the increase of the plate thickness. Protection efficiency Nc of pore structure metal armor varies from one another in target material with the same thickness. Target ballistic performance could be further improved through matching of hardness and toughness. It is concluded that ballistic performance of single-layer metal armor was better than double-layer metal armor with the same thickness. Thickness effect result obtained from numerical simulation showed similar regularity with that of target test results.Ballistic resistance mechanism of pore structure metal armor was systematically explored through thickness effect test and other tests towards small caliber projectile. In summary, it provided new insights and technical support for engineering application.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Arms industry > Ammunition, fuses, pyrotechnics > Ammunition > Shells : the use and construction of > Penetrators , HEAT , grated A bomb
© 2012 www.DissertationTopic.Net  Mobile