Dissertation > Excellent graduate degree dissertation topics show

Study on the Stress and Deformation Characteristics of the Steel Corrugated Pipe Culvert under High Embankment

Author: LiuGang
Tutor: YangXiaoHua
School: Chang'an University
Course: Geotechnical Engineering
Keywords: steel corrugated pipe culvert load character structure stress character transshape character finite element analysis
CLC: U449.83
Type: Master's thesis
Year: 2012
Downloads: 48
Quote: 0
Read: Download Dissertation


Bellows-type culvert is formed by the connection and assembly of corrugated pipe orcorrugated plate. Heterogeneous foundation sedimentation always leads to the destroy of theculvert, the use of flexible and hith-intensitive steel bellows-type culvert can solve thisproblem because it fits the foundation and basic transshape.Moreover, steel bellows-typeculvert has the excellent characteristics of stress with axial bello, axial and radial distributesimultaneously the loads for stress and strain, so it can decentralize load effect to the biggestextent and best give play to the advantages of steel structure. However, the steel corrugatedpipe culvert in the high fill embankment of special is the stress deformation characteristics ofwhat is missing.This paper gathers material about the feature of high fill embankment culvert structure inmountainous area at home and abroad. On the basis of the large number of field survey andtest and due to the combine with the large scale in situ test, through finite element simulationcalculate, this paper deeply researches the load character, the structure stress character andtransshape character in the application of high fill embankment culvert in mountainous area,and achieved the following progress.1. This paper explores the load character of steel bellows-type culvert. Firstly, selectingthe bellows-type culvert’s representative cross section and inbuilding the earth pressure gageinto it, then analyses its earth pressure distribution in different fill height and concludes theload regulation of steel bellows-type culvert.2. This paper studies the load character and transshape character of steel bellows-typeculvert. On the basis of collecting research results about steel bellows-type culvert at homeand abroad, selecting representive cross section and doing the field test, analyzing theload-carrying capability and transshape character of steel bellows-type culvert under differentfill height, finally put forward the load-carrying feature and transshape regulation of the steelbellows-type culvert.3. This paper makes use of finite element analysis software to do the further study onload character, structure stress character and transshape character of the steel bellows-typeculvert.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Design of Testing Equipment for Electronic Products,TN06
  6. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  7. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  8. Sham hose drum drive means and hydraulic system of the structure,TE973
  9. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353
  10. Study on Mechanical Property of Plug-pin Steel Tube Scaffold Platform,U673.3
  11. Virtual Prototype Realizing and Performance Research of Longitudinal Roadheader,TD421.5
  12. Research on Optimum Design of Plantary Gear Transmission Mechanism for Cutterbar,TH132.41
  13. The Structure Analysis and Optimization of Casey Green Laser Emission Dishes Support Bracket,TH743
  14. The Influence of Frame Structure Local Column Failure on Overall Performance,TU375.4
  15. Study of the Full Hydraulic Track Movable Power Station,TM624
  16. A strong dynamic load mechanical holder dynamics simulation and finite element analysis,TJ03
  17. TVM subway ticket design and analysis of the transmission device,U293.22
  18. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  19. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  20. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  21. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391

CLC: > Transportation > Road transport > Bridges and Culverts > Culvert > A variety of culvert > Pipe culvert ( circular culvert )
© 2012 www.DissertationTopic.Net  Mobile