Dissertation > Excellent graduate degree dissertation topics show

The Research on Steering-by-Wire System Based on FlexRay Bus

Author: YangHua
Tutor: ZhangGuiXiang
School: Hunan University
Course: Mechanical and Electronic Engineering
Keywords: Steering-by-Wire system FlexRay Fault-tolerant control Angle ratio
CLC: U463.4
Type: Master's thesis
Year: 2011
Downloads: 114
Quote: 2
Read: Download Dissertation

Abstract


Vehicle steering system is the key assembly impact on the active safety of vehicles and vehicle handling and stability. As the next new generation steering system, Steering-by-Wire System removed the mechanical connection between the steering wheel and front wheel, it is a power steering system entirely by the control signal of electronic control unit to control vehicle steering. We can design the angle transmission and force transmission of steering system freely based on different circumstances. According to the requirements of steering by wire system and combine the high speed, deterministic, fault-tolerant, flexibility features of FlexRay bus, we use FlexRay bus to communicate in steering-by-wire system; it can satisfy the real-time and reliability requirements of steering system.The paper has finished the design of the steering-by-wire system based on FlexRay bus communication. Firstly, this paper reviewed the automobile steering system development process, summarized the principle and structure characteristics of the steering-by-wire system. Then researched on the FlexRay bus protocol based on time triggered, determined the FlexRay network topology in steering-by-wire system. Then completed the design scheme of steering-by-wire experimental table, specific analyzed the system based on the modules function and requirement, determined the selection and configuration of steering-by-wire experimental table components, completed install the whole steering-by-wire experimental table, provided the hardware foundation for the following system development. Then analyzed the function structure of steering–by-wire system, built steering control module node and steering executive module node, this two modules use FlexRay dual channel bus to communicate. It has completed node design of hardware and software based on MC9S12XF512 and TJA1080 bus driver. The steering control module and steering executive module establish contact through transmission ratio, established the dynamic model of steering-by-wire system, Analyzed the steering system’s aligning torque, determined the steering-by-wire system ideal transmission based on the vehicle system yaw velocity gain and the lateral acceleration gain for setting value method, and researched the steering executive motor’s control strategy according ideal transmission.FlexRay network use double channels to communicate in steering-by-wire system, this two channels transmit the same data realize the redundancy backup; it can meet the system’s fault-tolerant functional requirements.

Related Dissertations

  1. Construction and Performance Analysis for In-Vehicle FlexRay Backbone Network,TP273
  2. Research on Design of In-Vehicle CAN/FLEXRAY Gateway Technology,TP273
  3. Research on Real-time Scheduling for Static Segment in FlexRay Systems Based on Hybrid Genetic Algorithm,U463.6
  4. Research of Fault Tolerantand Reconfigurationalgorithm on Winged Missile with Typicalfailures,V249.1
  5. The Researchs for Fault Diagnosis Algorithm and Simulation Based on Sliding Mode Observer,TP277
  6. Co-simulation on Steer-by-Wire Integrated Control Based on ADAMS and MATLAB,U463.4
  7. The Research of Redundancy and Fault-Tolerant Technology Based on Real-Time Operation System,TP316.2
  8. Study on Drive and Control System of Five-Phase Pmsm and Fault-Tolerant Operation,TM341
  9. Network Adaptive Wireless Video Transmission Algorithm for Study,TN919.81
  10. Controller Design for Robust Fault-Tolerant Control of Linear Systems with Time-Delay,TP13
  11. Model-based fault detection and fault-tolerant control method,TP273
  12. Six -phase permanent magnet synchronous motor drive system of fault diagnosis and fault tolerance,TM341
  13. Fault Diagnosis and Fault-tolerant Control for Singular Bilinear System,TP277
  14. Robust Reliable Control for Complex System,TP13
  15. Research on Fault Tolerant Control Based on BP Neural Network,TP18
  16. Fault-tolerant control design of the network control system,TP393.09
  17. Robust Fault Tolerant Control of Large Systems decentralized,TP273
  18. Three Gorges ship lift control system design and reliability,U642
  19. Electro-hydraulic servo system fault-tolerant control research,TH137
  20. A Study on Integrity Conditions and Design of Controllers with Integritybased on LMI Approach,TP273
  21. The Research of Fault Detection and Diagnosis on Integrated Navigation System,U666

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Steering system
© 2012 www.DissertationTopic.Net  Mobile