Dissertation > Excellent graduate degree dissertation topics show

Passenger Restraint System Optimization Research Based on Co-driver’s Protection in Frontal Crash

Author: AiJun
Tutor: CaoLiBo
School: Hunan University
Course: Vehicle Engineering
Keywords: Frontal crash Passenger restraint system optimization Co-driver Finite element Multi-rigid-body Compare
CLC: U491.6
Type: Master's thesis
Year: 2011
Downloads: 33
Quote: 1
Read: Download Dissertation

Abstract


Chinese road traffic accident statistics from2005to2007show that， theincidence of frontal crash is27%, it is the second largest accident type, the death tollof frontal crash account for29%of all deaths, this rate is the highest in all accidenttypes. According to the statistics of NHTSA, in America, the co-driver deaths inpassenger car accident account for19%of passenger car all occupant deaths in2008.A lot of practices show that good car occupant protection system design candramatically reduce occupant hurt degree and mortality. Therefore, optimizationresearch of co-driver restraint systems in frontal crash is very necessary.A passenger car which is independent research and development was the researchobject of this paper. The modeling parameters were obtained from the vehicle crashexperiment. The finite element simulation model of co-driver frontal impact wasestablished and validated with LS-DYNA and HYPERMESH. The restraint system offinite element model was optimized using surrogate model method. The optimizationresults show that, when the triggering time is10ms, the vent area is2461mm2and thegas flow rate is original value, the minimum WIC could be obtained.The multi-rigid-body simulation model of co-driver in frontal impact wasdeveloped and validated with MADYMO.The dummy injury indexs and dynamicresponse characteristics curve of multi-rigid-body simulation model were comparedwith the compute results of finite element model. The compare results show that, themaximum error of WIC is7.24%, minimum error is0.07%. The maximum error ofHIC is10.5%, minimum error is0.27%. The maximum error of C3msis-7.73%,minimum error is0.27%. The maximum error of Ccompis8.19%, minimum error is-1.1%.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  5. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  6. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  7. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  8. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  9. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  10. Design of Testing Equipment for Electronic Products,TN06
  11. S-lay Installation Analysis for Deepwater Pipeline,TE973
  12. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  13. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  14. The Comparison and the Consideration about the Difference in Curriculum Standards Content in Statistics and Probability between China & England,G633.6
  15. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  16. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  17. Application and Significance of CISS Classification and TOAST Subtype on Ischemic Stroke (Attach 210 Cases Analysis),R743.3
  18. Different Bottom Structure of Dental Brackets Affect the Adhesiveness-Three Dimensional Finite-element Analysis,R783.5
  19. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  20. Sham hose drum drive means and hydraulic system of the structure,TE973
  21. Study of the Tunnelling Laneway Drilling and Anchor Rope Installation Device,TD353

CLC: > Transportation > Road transport > Technical management of traffic engineering and road transport > Traffic engineering and traffic management > Car traffic safety and protective equipment
© 2012 www.DissertationTopic.Net  Mobile