Dissertation > Excellent graduate degree dissertation topics show

Research on Controlling System for Three-position Automatic Inspected Instrument on Car Piston Ring

Author: LiuQi
Tutor: WangZhong
School: Tianjin University
Course:
Keywords: Piston ring Light-gap tightness degree end clearance PLC sorting machine
CLC: U467.4
Type: Master's thesis
Year: 2012
Downloads: 28
Quote: 0
Read: Download Dissertation

Abstract


With the development of the automobile industry rapidly, the automobile as ameans of transport has been recognized by people more and more. Manufacturers areconcerned about the performance of automotive products firstly. Piston ring is one ofthe important parts for engines. Its performance has decisive influence on the qualityand efficiency of the engine. Light-gap tightness degree and the piston ring endclearance are the two main indicators. Currently in domestic, Light-gap tightness andthe end clearance of the piston ring are inspected manually but the AutomaticInspected Instrument on Parameters of Train Piston Ring cooperated with CSRCorporation Limited. There are some problems when inspected manually, such as,low efficiency, poor accuracy, affecting the eyesight. Therefore, relying solelyon manual inspection does not guarantee the test quality of the piston ring.This issue is sub-topics of one of "national major project issues"-auto parts precisioncoupling of automated detection of common technology based on laser/CCDprinciples, which called” research on Automatic Inspected Instrument of the pistonring”.Basing on the “Automatic Inspected Instrument on Parameters of Train PistonRing” cooperated with CSR Corporation Limited, the group developed the AutomaticInspected Instrument of the piston ring, which could detect the Light-gap tightnessdegree and the piston ring end clearance at the same time by multi-position. The issueused programmable logic control, PCI data acquisition card, incremental encoder andother industrial devices, combining with advanced optical detection technology andcomputer vision technology to achieve the detection.The main work of the thesis includes the following aspects:1. Designed and tested the Control System ofAutomatic Inspected Instrument onParameters of Piston Ring. Selected the appropriate implementation of components.Identify and implement appropriate control mode.2.According to the different operation modes, we determined the control method,which based on the different characteristics of PLC and data acquisition card PCI. Wewrote the program of the PLC and data acquisition card PCI to establish astable communication between PC and PLC. 3. Designed the overall program for the detection station of the Light-gaptightness degree, selected the light source lighting solutions and resolved the problemof the detection process of winding.4.Analyses the experimental device positioning accuracy and repeatability ofpositioning precision, by constantly modify the program and the external circuit,allowing the system to achieve a high positioning accuracy and repeatability.

Related Dissertations

  1. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  2. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  3. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  4. The Research of Coal Mine Drainage Automatic Control System,TP273
  5. Research on Coal Centralized Selection Control System of Hebi Sixth Factory,TD94
  6. Study on Dressing Device and Process for Diamond Roller Wheel,TG743
  7. Research of Mine Gas Station Monitoring and Management System for Personal Use,TP277
  8. A ship engine room monitoring and alarm system reform and implementation,TP277
  9. Design of Variable Universe Fuzzy PID Controller for Water Supply System,TP273
  10. Study on Measurement and Control System of Hood Ventilation System for a Paper Machine,TS734
  11. Development and Application of Motion Function Block Based on Embedded PLC,TP273
  12. Improved Design of the Combustion System of Regenerative Heating Furnace Based on CFD Simulations,TG307
  13. Research on the PLC Control System of NC Rack Form Grinding Machine,TG616
  14. PLC-based control of a full-featured integrated test bench Hydraulic Research,TH137.51
  15. Based on the DC leakage current research insulator flashover,TM216
  16. Research of Thrust Hydraulic System of Earth Pressure Balance Shield Machine,U455.39
  17. The Stacking and Reclaiming Process and the Research on Control Method of Bucket Wheel Stacker-Reclaimer,TH237.1
  18. Research on Continuous Emission Monitoring System Based on MCGS and PLC,X831
  19. Research and application of blast furnace gas -fired steam turbine blowers,TF321.8
  20. Research on Electronic Control System of Mine-used Hydraulic Support,TD355.4
  21. The Study of Wind Power Hybrid Control System Based on PLC,TK89

CLC: > Transportation > Road transport > Automotive Engineering > Vehicle test > Parameters of the instruments and technology
© 2012 www.DissertationTopic.Net  Mobile