Dissertation > Excellent graduate degree dissertation topics show

Development of New 8A-FE Series of Engine

Author: LiAng
Tutor: YaoChunDe; XiShuHe
School: Tianjin University
Course: Power Machinery and Engineering
Keywords: Electronic control system Engine Match Calibration
CLC: U464
Type: Master's thesis
Year: 2012
Downloads: 32
Quote: 0
Read: Download Dissertation

Abstract


8A-FE type of engine which we are producing was designed in 1980s in Japan. Implementation of Euro 2 emission standard, since the Euro 3 emission standard will be use in our country,8A-FE type of engine will not fit for the new standard. How to prolong the life of 8A-FE type of engine becomes the most important thing that we faced to.According to the characteristic of the engine, in the need of improve the engine emission and excitation potential of the engine, based on the protection of power and fuel consumption, we study the engine and try t o pr omoting t he technology of the engine. Make it match Delphi control system and fit for the Euro3 emission standard. In the process of our study, consider the feature of the engine, we start our work in the field of design the important paits、chose the important sensors、match the spark system. After these we match the electronic control system; do engine performance test and engine calibration test on test bench. We concentrate our study on the field as follow:1) Change oxygen sensor open-loop control into close-loop control. In order to precise control t he c oncentration o f m ixed g as, fit for the s eriously emission standard.2) Fuel control system changed into no return system. Improved fuel control precision, reduce the cost of our production.3) Catalytic converter changed into the style of tight coupling. Improve the speed of temperature response; reduce the harmful emission in low temperature.4) Add the system of knock control. Make the engine work s afer.5) Add EOBD s ystem. N ew engine c ontrol s ystem m atch t he or der of EOBD, and fit for the emission order of our country.After new engine Development, we do road test of the car. Then we do hot test、cold calibration、plateau calibration、EOBD calibration. Finally we cure the procedure of ECU.Through the test, we improve the procedure of ECU and make the engine meet the requirement. At last we confirm that the new 8 A-FE engine meet the requirement of the emission rule, dynamic property and economy also meet the requirement of the customer’s expectations. We achieve the goals of upgrade.

Related Dissertations

  1. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  2. Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
  3. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  4. Robust Control Research on Automotive Engine Idle-Speed,U464
  5. Research on Nozzle Plume Temperature Distribution Measurement System,V434
  6. Research and Realization on Automatic Generation of Computing Engine for Myocardial Cell Electrophysiological Simulation,R319
  7. The Research of 3D Human Motion Capture Based on Reference Points,TP391.41
  8. Camera Calibration and Position and Pose Detecting on Vision Measurement System of PCB,TP391.41
  9. Key Control Technique of Wafer Handling Robot,TP242.2
  10. High Pressure Common Rail Diesel Engine Fueled with Biodiesel test under different atmospheric pressure,TE667
  11. The Effect of Nitrogen Phosphate and Potassium Proportion Fertilizers on Tea Tree Physiological Metabolism and Tea Quality,S571.1
  12. Applied Research of Emulsified Fuel on S195 Diesel Engine,TE626.24
  13. A Study on Assessment and Early Warning System of Water Pollution Effect by Land Loadings in Taihu Lake Basin,X52
  14. Design and Development of the Early-Warning System for Soil Pollution Based on .NET and ArcGIS Engine,X833
  15. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  16. Study on Reducing the Mower Vibration by Optimizing the Crank-rod Mechanism of 170F Engine,S817.111
  17. Sound source directional mobile robot Methods,TP242
  18. Web search engine related technology research,G354
  19. Cross-Calibration of HJ1-CCD,TP751
  20. Welding Orientation System Development of Container Reinforced Plate Based on Opencv,U169
  21. Application of high pressure common rail diesel engine technology in the development of,TK42

CLC: > Transportation > Road transport > Automotive Engineering > Automotive engine
© 2012 www.DissertationTopic.Net  Mobile