Dissertation > Excellent graduate degree dissertation topics show

Study on the Shafting Alignment for Ship Based on Slipway Aligning

Author: YangJinZhong
Tutor: LiuShiPing; LiShiQi
School: Huazhong University of Science and Technology
Course: Mechanical Design and Theory
Keywords: Shafting alignment Hull deformation Finite element method Geneticalgorithm Gyroscopic effect
CLC: U664.21
Type: Master's thesis
Year: 2012
Downloads: 23
Quote: 0
Read: Download Dissertation

Abstract


Shafting alignment is a very important and time-consuming process during the designand construction of ship, The quality of shafting alignment is related to the normal operationof ship and security of crew directly. For the reason of being calculated or measured difficultof hull deformation and lack of experience in shafting aligned on slipway both theoreticallyand practically, currently, the most popular procedure of alignment work is to complete theinitial alignment of main engine and shafting on slipway first, and then, final alignment isfinished after the launch of ship, following, all auxiliary equipments associated with mainengine are installed. Completing the transformation of installation mode from launch toslipway with the consideration of actual factors can shorten the time of ship building greatly,and meantime it can provide a long-term, stable and normal condition for the operation ofship and shafting.In this thesis, a generalized summarization regarding modeling, alignment calculationand optimization was made for ship shafting. Some factors regarding hull deflection was alsodiscussed. Furthermore, the calculation and method of measurement about hull deformationhave been analyzed. On this basis, Finite Element Analysis(FEA) method with high accuracywas chosen to build the entire analysis model in consideration of bearing stiffness andshearing deformation of beam, Gaussian Elimination was used to solve the equation. And also,Improved Genetic Algorithm(IGA) was developed to solve the optimization calculation ofshafting. Taking the propulsion system of some bulk carrier as an example, influence of hulldeformation on shafting alignment was analyzed, shafting alignment calculation based onslipway aligning were carried out. The presented analysis method was proved to be high-efficient and the derived bearing offset could be used in ship shafting, which establishedtheoretical basis for the shafting aligned on slipway.In order to improve the result of alignment, shock response and swing vibration werealso studied from the perspective of design, which could provide reference for the rationalarrangement of bearings. Furthermore, gyroscopic effect were calculated and analyzed.

Related Dissertations

  1. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  2. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  3. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  4. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  5. Dynamics Analysis and Optimization Design of Hydraulic Excavator Working Equipment,TU621
  6. The Finite Element Analysis and Simulation of Excavator Working Device,TU621
  7. Behavior of Installation and Seepage Law of Offshore Skirted Suction Foundation for Offshore Wind Turbines,P75
  8. Study of Modal Characteristics of a Car Body-in-White,U463.82
  9. The Design and Implement of B/S-Based On-Line Testing System,TP311.52
  10. Studies on Wind-induced Dynamic Response and Vibration Control of Guyed Cat-head Transmission Tower-line System,TM753
  11. Decision Design and Research on Moving-iron Linear Oscillatory Motor with Two Separated Stators,TM359.4
  12. Sensitivity Analysis on Fatigue Reliability of a Turbine Disk Using Finite Element Method,V232.3
  13. Research narrower than the opening Kita highly optimized root,TU347
  14. Strength Analysis and Parameter Optimization of Single Channel Drum Dryer,TK173
  15. Structural Strength Analysis of Rotary Vane Dryer,TK173
  16. Study on Dynamic Space Structure of Groundwater on Land Use,P641.8
  17. Fatigue Analysis and Life Prediction of a Loader’s Drive Axle Housing,TH243
  18. Principle and Experiment Research of Road Simulation Test Stand for Vehicle Parts,U467.3
  19. The Fatigue Life Study of a Car Body Based on the Random Vibration,U463.82
  20. Fatigue Reliability Sensitivity Analysis of High Speed Rail Axle,U270.3
  21. Research on Car Frontal Impact Simulation and Crashworthiness Analysis,U467.14

CLC: > Transportation > Waterway transport > Marine Engineering > Ship machinery > Ship shaft,gear,and car device > Shaft
© 2012 www.DissertationTopic.Net  Mobile