Dissertation > Excellent graduate degree dissertation topics show

Model Reduction Method for Dynamic Anslysis and Its Application Based on Deformation Modification and Substructure Method

Author: ZhangXiang
Tutor: YiPing
School: Dalian University of Technology
Course: Structural Engineering
Keywords: Reduced model Substructure method OptimizationStructural dynamic characteristic Reliability index
CLC: TU311.3
Type: Master's thesis
Year: 2013
Downloads: 32
Quote: 0
Read: Download Dissertation

Abstract


Engineering structures such as high-rise buildings, bridges, tunnels and stadiums are becoming more and more complex. It is hard to describe the performance of complex structures from structural mechanics concepts. With the development of finite element method and computer aided engineering, creating a complete model of the complex structure becomes possible. However, the establishment of a complete computational model requires a lot of effort and storage space. It is very difficult to carry out a stuctural dynamic analysis based on this complete computational model, let along dynamic optimization and reliability analysis. Therefore it is urgent to balance between the accuracy and the simplification and to get a model describing the structural dynamic characteristics accurately enough, whereas with relative small computational burden. Accordingly, this article proposed a method to obtain reduced modelfrom the accurate finite element model and then studied the reduced model’s dynamic characteristics. Stuctural dynamic optimization and reliability analysis based on this reduced model are also carried out. The following contents are included:1. Give the details of the structure modal analysis method and the model reduction method based on deformation modification. ANSYS modal analysis method and the way to output mass and stiffness matrices are introduced. MATLAB is used to read-in the mass and stiffness matrices and excute the modal analysis. A reduced model is then obtained though the deformation modification. Then the reduced model’s frequencies are calculated and several examples show its validity and efficiency.2. Propose a new simplification method—the substructure deformation modification method. Using the the substructure module in the ANSYS and combined with the deformation modification method, a complex structure is simplified to get a reduced model. Four examples show that the simplification models remain dynamic characteristics of the previous complex structures.3. Establish dynamic optimization problems based on the reduced models through the variable decomposition method. Taking beam elements and shell elements as examples, analyze the characteristics of the mass and stiffness matrices. Find the design variables’ influence on the reduced model and establish dynamic optimization problems. Several examples prove the efficiency and correctness of the proposed method.4. Excute structural dynamic characteristic reliability analysis based on the reduced model. Using the geometric meaning of the structural reliable index, the reliability analysis is turned into an optimization problem. Calculate the reliablity index using several optimization methods and compare the results with the results of Monte Carlo simulation. The accuracy and efficiency of the proposed method is proved.

Related Dissertations

  1. Research on Discovery Technology of Key Nodes in Complex Networks,O157.5
  2. Analysis and Forecasting of Power Equipment Reliability Standards,TM621.3
  3. Reliability Analysis of the Earth Slope in Terms of the Parameter Spacial Variance and Correlation,TU43
  4. Research on Reliability of Slide-Resistant Pile,TU473.1
  5. Research on the Impact of Travel Time Reliability on Residents’ Trip Decision-making,F572.88
  6. Study on Optimal Design Methods of Truss Structures Based on Reliability,TU323.4
  7. Existing reinforced concrete bridges of varying reliability,U441
  8. On Reliability-based Optimal Design of Large Multi-troughs Aperture,TV672.3
  9. Reliability Analysis of Cable Dome Structures Based on Response Surface Method,TU399
  10. Study on Safty Evaluation of Bridges in Service Based on Structural Reliability Theory,U447
  11. ANSYS structural system reliability analysis based on gravity,TV31
  12. Reliability-based Analysis and Design on Shear Capacity of Concrete Beams Strengthened with CFRP Laminates,TU375.1532~.3
  13. Study on the Suspended-anchor Retaining Wall Reliability Calculation,TU476.4
  14. The Design Theory and Methods of Camping Housing Structure,TU318
  15. Reliability analysis of bearing capacity of Motion Picture Arts Palace Wujin span prestressed concrete beam members,TU378
  16. Southwest Jiaotong University School of Software archives management system development and design paper analysis,TP311.52
  17. Analysis on Reliability of Pile under Inclined Loads,TU473.1
  18. RCC gravity dam using cooling water pipes and crossing over the water flood Finite Element Analysis of Temperature Control Simulation,TV642.2
  19. Nonlinear Analysis of Interaction of High-Rise Building Superstructure-Piled Raft Foundation-Soil,TU473.1
  20. Reliability Assessment of Reinforced Concrete Durability Based on Concrete Permeability,TU528
  21. Censored Samples Bayesian Reliability Analysis and Applications,O212.8

CLC: > Industrial Technology > Building Science > Building structure > Structure theory to calculate > Structural Mechanics > Structural Dynamics
© 2012 www.DissertationTopic.Net  Mobile