Dissertation > Excellent graduate degree dissertation topics show

Preparation and Research of Silver-filled Electrically Conductive Adhesives for Tranducer

Author: WangChunYing
Tutor: ZhangDongXing
School: Harbin Institute of Technology
Course: Materials Science
Keywords: conductive adhesive preparation and characterization instu monitor additive transducer
CLC: TM24
Type: Master's thesis
Year: 2013
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


With the increasing demand for environment protection and user-friendliness ofthe electronic industry, the electronic tin-lead solder used in traditional transducershas exposed its shortcomings, such as the over-high temperature and lead containing.For these reasons, people begin looking for substitute and the electrically conductiveadhesives (ECA) have caused our attention because of its superior performance. Inthis paper, based on the demand of the transducer, a high performance ECA isinvestigated and designed.Firstly, the selection principles of ECA are determined and the designformulation and curing process are analyzed. The influence of sliver filler content,the weight radio between flake and spherical sliver, and the amount of diluents on thefeatures of the ECA such as the room/high temperature volume resistivity, theshearing strength, the glass transition temperature, and the morphology are studied.By using the in-situ monitoring method, the volume resistivity and microstructure areinvestigated in the post-heating treatment process as a function of time andtemperature. To improve the conductivity of the sliver powder, the impact of thesurface organic lubricant on the resistance of the ECA and the mechanisms ofdifferent additions are investigated. Moreover, an affective bonding method, thebonding mechanics, and the failure type of interface are also found in this paper.Secondly, the experimental results show that ECA can achieve the bestconductivity when the content of diluents is15%and the resistivity of the ECAselecting mixed sliver as filler is lower when the radio of spherical sliver increases.The conductivity of ECA is significantly improved with the silver rinsed by alcoholand diluted acid because the sliver salt generated by lubricant and the silver isremoved. The higher of post-heating temperature, the lower resistivity can beobtained. Furthermore, additional conclusions about ECA are also obtained in thispaper such as the strength performances, the thermal features, and the applicationperformances.Thirdly, the research results show that2%content of silane coupling agent isoptimal and the toughening is able to reduce the internal stress of ECA so as toincrease the resistivity. Besides, the conductivity of ECA can be improved by4times with the conductive accelerator which increases the internal crosslinking intensitydramatically.Finally, the analysis results of packaging show that ECA belongs to the middlematch layer and its sound attenuation is decrease with the increase of sliver powderin the ECA. In addition, The ECA containing silane coupling agent has both physicaland chemical bonding and its section is cohesive failure. On the contrary, the ECAwithout silane coupling agent only contains physical bonding and the section ismixed failure.

Related Dissertations

  1. The Effect of Composite Additive on the SNCR,X701
  2. Study on the Combustion Character of Black Liquor from NSSC in Fluidized Bed,TK16
  3. The Research on Action Mechanism of Additive Used in Through-Hole Copper Plating and Its Selection,TQ153.14
  4. Study on Application of Non-phosphate Additive in Frozen Penaeus Vannamei and Mechanism of Water-holding,TS254.4
  5. Study on the Migration of Esters Additives in Food Plastic Packaging Materials,TS206.4
  6. Lithium anode material calcined alumina crucible Development,TQ174.6
  7. Automatic Identification Based on the Resonant Frequency of the Ultrasonic Power,TG663
  8. The Design of Bandpass Filter with the Structure of Ladder Type for Surface Acoustic Wave Resonator,TN713.5
  9. The Properties and Structural Properties of k-Quasi-additive Fuzzy Integral on Fuzzy Sets,O159
  10. Studies on the Preparation of Carboxymethyl Chitosan and Its Sulfonation,O636.1
  11. The Research and Design of Intelligent Pressure Transducer Based on MSP430F448,TP212.6
  12. The Significance of EGFR and STAT3 mRNA Expression in Epithelial Ovarian Cancer,R737.31
  13. Minimalist techniques of musical composition,J614
  14. Paul matrix rank equation addition surjective,O151.21
  15. Preparation and Characterization of PVDF Composite Hollow Fiber UF Membranes,TQ028.8
  16. Preparation of Polished Tiles with Polishing Porcelain Waste,TQ174.6
  17. Study on Pilot Test of Removal of Solid Catalyst Particles in FCC Slurry Oil by Ultrasonic Treatment,TE624.91
  18. A Study of PAPR Reducing in the OFDM Underwater Acoustic Communication Systems,TN919.3
  19. Study on Ultrasonic Testing Technology for Motor Bolt in Service,TM31
  20. Research on All Fiber Optical Current Transducer,TM452
  21. Testing Technology of Giant Magnetostrictive Material Characters and Its Transducer,TB552

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Conductive materials and their products
© 2012 www.DissertationTopic.Net  Mobile