Dissertation > Excellent graduate degree dissertation topics show

The Study of Batio3 Based Lead-free Piezoelectric Ceramics

Author: GuoXiaoZan
Tutor: WuYuGong
School: Tianjin University
Course: Microelectronics and Solid State Electronics
Keywords: barium titanate (BaTiO3) Curie temperature phase transition internal stress
CLC: TM282
Type: Master's thesis
Year: 2012
Downloads: 300
Quote: 0
Read: Download Dissertation

Abstract


Temperature stable barium titanate BaTiO3 based dielectric materials have been intensively investigated owing to their high dielectric constant, stable permittivity temperature characteristic. BaTiO3 was also the first developed piezoelectric ceramic and is still widely used now.In the modern industrial system, lead-based piezoelectric ceramics accounted for most of the market, this is because barium titanate has some shortcoming, while lead-based piezoelectric ceramics have higher piezoelectric properties, higher Curie temperature and so on. So the lead-based piezoelectric ceramics are widely used in various types of electronic devices. However, piezoelectric materials containing lead have human health and environmental harm. So the development of lead-free piezoelectric ceramics research is an urgent and significant task, what has attracted wide attention of the scholars. From this point of view, this paper will ascertain the study of the lead-free piezoelectric ceramics. For xBiFeO3–(1-x)BaTiO3 system, X-ray diffraction data showed that 2–8mol%BiFeO3 can dissolve into the lattice of BaTiO3 and form single phase. The crystal structure changes from tetragonal to cubic phase. Scanning electron microscope images indicated that the ceramics have compact and uniform microstructures, and the grain size of the ceramics decreases with the increase of BiFeO3 content. Dielectric constants were measured as functions of temperatures (25 to 200℃). With rising addition of BiFeO3, the Curie temperature decreases. For the sample with x = 0.08, the phase transition occurred below room temperature. The diffusivity parameterγfor compositions x = 0.02 and x = 0.07 is 1.21 and 1.29, respectively. The relaxor-like behaviour is enhanced by the BiFeO3 addition.This paper use the way of increasing the internal stress to enhance the Curie temperature of BaTiO3. Both of cordierite and glass were added to barium titanate. The cordierite was used for producing the internal stress between barium titanate grains, and glass for reducing the sintering temperature to prevent other materials reaction under high temperature. The cordierite and glass powders were prepared by the sol–gel method. We designed three different formulations. They are 5wt%G-5v%C-95v% BT, 5wt% G-10v% C-90v% BT and 5wt% G-15v% C-85v%BT, respectively. The dielectric constants were measured in a temperature range between 30℃and 200℃. By the results, when 5% glass by weight and 10% cordierite by volume were doped, the highest Curie temperature of barium titanate was obtained, increased 5.2℃than pure BaTiO3.

Related Dissertations

  1. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  2. The Topological Phase Transition of Asymmetric Two-component Fermi Gas in Two Dimensions,O469
  3. Reseach of Temperature Sensitive Nanogels with Tuned Temperature Sensitivity,TB383.1
  4. Ku-band high power microwave NiZn ferrite material properties and simulation applications,TM277
  5. Nickel microlens array mold core micro electroforming process and surface quality,TH74
  6. Vestigation on Magnetic Entropy Change Properties of LaCeFeSi and NiMnSn Magnetocaloric Materials,O482.5
  7. Preparation and Mechanical Properties of Metal Thin Films,TQ153.1
  8. Study on the Lead-free High Curie Temperature BaTiO3 Based Materials,TB302
  9. Effects of Ultra-Fine Crystal Powder on Epoxy Resin Adhesive,TQ433.437
  10. The Study of Piezoelectric Properties on BaTiO3 Based Lead-free Piezoelectric Ceramics,TM282
  11. Effects of Additives on the Microstructure and Mechanical Properties of Electrodeposited Copper Foil and the Optimal Scheme,TN41
  12. On-Line Measurement of Ceramic Paste Inner Stress Based on the Soft-Measurement Technology,TQ174.6
  13. Nonlinear Waves and Phase Transition in Dust Crystals,O53
  14. 3D transition metals nickel and its alloy thin film growth kinetics and magnetic properties of numerical simulation,O484.1
  15. Nd and Te doping on phase composite La_ (0.6) Sr_ (0.1) MnO_3 structure and magnetic properties,O482.5
  16. Study of Structure and Magnetism for La0.75Sr0.25 Mn1-yO3 and La0.6Sr0.1CuxMnO3 Materials,O482.5
  17. A Study on the Nanometer Size Effect of Double Perovskite La2NiMnO6,TB383.1
  18. Characterization of Doped GdCoO3, Synthesis and Characterization for the Series Sr-K-Fe-Mo-O Compounds,TB303
  19. Preparation and Ectrocaloric Effect of Preferred Oriented Barium Zirconium Titanate Thin Films,O484.1
  20. The First-principles Calculation and Monte Carlo Simulation of ZnO-based Diluted Magnetic Semiconductors,O471
  21. Microstructure and Magnetocaloric Properties of La(FexSi1-x)13 and Gd5Si2Ge2-xFex Alloys,TG146.4

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Electric and ceramic materials > Piezoelectric ceramics
© 2012 www.DissertationTopic.Net  Mobile