Dissertation > Excellent graduate degree dissertation topics show

Research and Design on Hardware of New Electronic Transformers Collector and Merging Unit

Author: WangXiaoMing
Tutor: ZhouYouQing
School: Hunan University
Course: Electrical Engineering
Keywords: Electronic Transformer Data Acquisition System Analog integrator Digitalintegrator Merging Unit
CLC: TM451
Type: Master's thesis
Year: 2012
Downloads: 112
Quote: 0
Read: Download Dissertation

Abstract


With the development of power industry and the increasing of transmission capacitanceand rated voltage in power system, especially in recent years with the rapid development ofthe digital substation and smart grid, conventional ferromagnetic transducers has been unableto satisfy with the digital and intelligent development needs of power grid. Electronictransformer is highlights and frontiers at home and abroad in electronic transformer research.The interface between the electronic transformers and bay device is the focus of thesuccessful application. As the key equipment of the digital output of the electronictransformer, the study of collector and merging unit will be of great significance.At first, this paper introduces the developent of electronic transformers, acquisitionsystem and merging unit in domestic and international mainly. The basic principle and systemstructure of electronic voltage transformer based on detecting current in capacitor and PCBplanar Rogowski coil current transducer are introduced. It discusses their advantages. In orderto make the two new electronic transformer in good application in practical engineering, thepaper data focuses on analyzing the new electronic transformer data acquisition system andmerging unit on the basis of the results of existing theory and practice. Then, it proposes amethod to acquisit signal based on STM32F103. The paper designs various modules inhardware, including pre-processing circuit module, ADC and MCU module, communicationmodule, post-processing circuit module, power module.Integrator is the key element in the two kinds of new type electronic transformers. So theintegration technique is described foucsly. In order to optimize integration performance, thetypical integral circuit is improved. The temperature characteristics of analog integrator areanalyzed, theory analysis and experiment data indicate that the temperature influents themeasurement accuracy. Digital integrator allowing for better accuracy and higher stability aremore adequate than analog one. In order to further improve the measurement accuracy, Digitalintegral algorithm is studied and the response of steady and transient current based ontrapezoidal integral algorithm is analyzed and simulated, techniques to deal with the drift andinitialization in digital integrator are proposed. The laboratory simulation testing platform isestablished and tested basing on new PCB planar Rogowski coil current transducer. Testingresults prove the validity of the design method.The definition of the merging unit is introduced, the features of the merging unit isanalyzed. According to the merging unit of data restoring module, data processing module anddata outputing module, it proposes a new method using FPGA and DSP for implementing the merging unit．The merging unit’s various modules are designed in hardware, which includingFPGA systems, DSP systems, ethernet module.

Related Dissertations

  1. Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
  2. Soccer Data Acquisition System,TP212.9;TP274.2
  3. The overall design and system development RTAD-CMDMDES of,U279.3
  4. Research of Embedded Merging Unit Based on IEC61850,TM45
  5. Calibration and Online Monitoring System for Electronic Transformer Based on IEC61850-9,TM45
  6. The Research of Intelligent Substation Technology Program,TM63
  7. Study on Some Key Technologies of Shanghai 220kv Transformer Substation Intelligent Reformation,TM63
  8. Design of Merging Unit Based on Embedded FPGA,TM45
  9. Digital substation relay protection system reliability design technology,TM76
  10. Rogowski coil electronic transformer design digital integrator,TP321.2
  11. FPGA-based electronic transformer developed by merging units,TM45
  12. Conventional substation intelligent transformation project implementation plan of,TM76
  13. SEPIC transformer three-level intelligence research,TM42
  14. Digital substation down power electronic transformer in applied research,TM76
  15. Intelligent Substation number of key technology research and application,TM63
  16. The Research on Power Electronic Transformer Based on Dual PWM Converters,TM42
  17. Applied research in the area of smart grid substation,TM76
  18. Digital Substation Applications and Development Trends of Intelligent Substation,TM63
  19. The Production of Merge Unit Based on IEC61850 Standard,TM76
  20. The development of the F-type of low-speed maglev track static parameter detector,U237
  21. Study on Electrical Transformer Calibrator,TM45

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Transformer > Voltage transformer
© 2012 www.DissertationTopic.Net  Mobile