Dissertation > Excellent graduate degree dissertation topics show
Load Frequency Control of Power Systems with Integrated Large Scale of Wind Power
Author: FuZuo
Tutor: ZhouZuo
School: Beijing Jiaotong University
Course: Electrical Engineering
Keywords: Integration of wind power Frequency stability Load frequencycontroller Particle swarm algorithm Fuzzy control Simulation
CLC: TM76
Type: Master's thesis
Year: 2012
Downloads: 274
Quote: 1
Read: Download Dissertation
Abstract
|
Faced to the serious situation of energy and environment, wind power developed fast in the past years, large amount of wind power integrated to the main grid is one of important ways. As the fluctuation characteristics of wind power, its output causes the fluctuations of frequency, thereby gives challenge to the main grid in frequency management and operation scheduling. In order that frequency is within permitted range, the effect of wind power on frequency should be researched and load frequency controller must be designed to adapt to the fluctuation resulted by injected wind power. The main followings contents are researched in this thesis.1) Based on the mode of wind speed and generator, the wind power output is simulated based on the MATLAB, which is handled as a negative load fluctuation for the interconnected system, realizing the combination of wind power and system.2) The dynamic model of system is analyzed, the control object and control mode are defined. Moreover, how the parameters of LFC, combination of control mode and the nonlinear characteristics of some modules influence the control results are discussed, following these, a more reasonable LFC model of an interconnected system with two regions is described.3) In view of the better adaptivity of intelligent control strategy and its ability to handle nonlinear systems, particle swarm intelligent control and fuzzy control are introduced to the traditional controller. In order to futher improve the performance of frequency control, the standard particle swarm algorithm is modified; fuzzy control and PI control are combined.Then an inter-connected power system with large scale of wind power integrated is researched, three calculation schemes, i.e with no LFC, with the traditional LFC and with the improved LFC are simulated based on the MATLAB/Simulink. The results shows that LFC is necessary to deal with the greater fluctuation came from the inputted wind power, and the advanced controllers with fuzzy control strategy and with PSO optimization control have better control.
|
Related Dissertations
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
- Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
- Study on Springback of High-Strength Steel Stamping,TG386
- Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
- Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
- Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
- Research on Orbital Control Method for Space Rendezvous and Docking,V526
- High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
- The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
- Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
- Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
- Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
- Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
- Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
- Numerical Simulation of Biomass Direct Reburning,TK16
- Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
- Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
- Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Power system automation
© 2012 www.DissertationTopic.Net Mobile
|