Dissertation > Excellent graduate degree dissertation topics show

A New Method of the Simulation Research on Axial Flow Turbo Fan Transformation in600MW Unit

Author: SongJiKun
Tutor: LiangShuangYin
School: North China Electric Power University
Course: Thermal Power Engineering
Keywords: fan blade 3d model numerical simulation fan allowance
CLC: TM621.3
Type: Master's thesis
Year: 2012
Downloads: 44
Quote: 1
Read: Download Dissertation

Abstract


Turbo fan has large power consumption in coal-fired power plants, and its economic operation play an important role in reducing power consumption of the power plant and improving the power plant comprehensive benefit. But, due to the excessive safety factor and ignore power consumption factors in the design process of the fan, the fan exist the problems of too big allowance and low efficiency in actual operation process, and waste an enormous amount of electricity.Based on some existing fan transformation methods and actual project of the power plant, this paper puts forward a new method of fan transformation-reducing allowance by optimizing blade.First of all, based on the measured data of axial flow fan, this paper build a3d model of fan prototype, and transform the fan prototype according to reform plan. And then this paper mesh and set boundary conditions for all models, import grid file into Fluent software, do numerical simulation for axial flow fan by a SIMPLE algorithm, RNG k-e turbulent model and second order upwind.By analyzing simulation results of the fan prototype, this paper get the conclusion of model reasonable and the simulation results reliable. And then by the comparative analysis of all models’simulation results, the results show that reducing allowance by optimizing blade can very good reduce fan allowance and fan power consumption, have very good electricity-saving effect, and on the later can provide a reference for fan electricity-saving transformation.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Study of the Effect with Straight and Bowed Stator in Different Axial Gaps,TH45
  6. Aerodynamic Performance Analysis of Low Pressure Turbine at Low Reynolds Numbers,V231.3
  7. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  8. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  9. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  10. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  11. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  12. Numerical Simulation of Biomass Direct Reburning,TK16
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Industrial Technology > Electrotechnical > Power generation, power plants > Power plant > Thermal power plants, thermal power stations > Power generation equipment
© 2012 www.DissertationTopic.Net  Mobile