Dissertation > Excellent graduate degree dissertation topics show

The Effect of Blade Shape and Emulsion Processing on Machinability of GH4169

Author: LiZuoZuo
Tutor: HanRongDi
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: Nickel-based superalloy shape of blade magnetic treatment emulsion ultrasonic treatment emulsion main cutting force tool wear
CLC: TG506
Type: Master's thesis
Year: 2011
Downloads: 17
Quote: 0
Read: Download Dissertation

Abstract


Nickel-based superalloy (GH4169) now is widely used in manufacturing Turbine and engine of aviation ,aeronautics and ship because of its outstanding thermal stabilities and thermal fatigue properties.However, GH4169 is very difficult to machine. The contridicton,which is urgently need to be addressed,between increasingly wide range of application and poor processing performance is becoming more and more prominent.There are many factors affecting the machinability and many studies have been done on tool materials,blade geometry parameters and cutting.But there are few studies on blade shape and emulsion treatment, so this paper intends to achieve the purpose of efficient machining by means of conducting a experimental study on both of them.Firstly,based on the review of machinability of nickel-based superalloy GH4169,this paper puts foword to machine GH4169 with round blade tool.So the indexable turning tools must be designed and manufactured,and cutting experiments need to be done between two different blade shape turning tools.Secondly, comparative experiments need to be done by using the round blade tool in the condition of dry cutting,emusion untreated and magnetic emusion to analysis impact rules of magnetic emusion on the main cutting force,the surface routhness and the chip morphology.In the condition of magnetic emultion,the orthogonal experiment was carried out and the main cutting force was the objective fuction.Through the orthogonal test,this paper analysises the impact order and degree of a_p, f, v_c, t_v, n_v and q_v to the main cutting force and obtain the best level combination.Then,it analysises the tool wear through the tool wear experiments.Thirdly, comparative experiments need to be done by using the round blade tool in the condition of dry cutting,emusion untreated and ultrasonic emusion to analysis impact rules of ultrasonic emusion on the main cutting force,the surface routhness and the chip morphology.In the condition of ultrasonic emultion,the orthogonal experiment was carried out and the main cutting force was the objective fuction.Through the orthogonal test,this paper analysises the impact order and degree of a_p, f, v_c, t_v, n_v and q_v to the main cutting force and obtain the best level combination.Then,it analysises the tool wear through the tool wear experiments.Finally,the cooling lubrication machnisim of emulsion after magnetic or ultrasonic treatment was discussed by using conical capillary model and knowledge of physics and chemistry.The results showed that molecular particle size became smaller overall after treatment and the proportion of molecular particle size which is less than 0.2μm significantly increased.The emulsion molecular could fully get into the capillary of cutting zone and form lubrication film to play an effective role in cooling and lubrication.

Related Dissertations

  1. On-line Monitoring of Tool Wear for Mass Production,TG71
  2. Research on Cutting Tool Wear Detection Based on Computer Vision,TP274
  3. Experimental Study of Tool Wear in Diamond Cutting of Optical Glass,TG711
  4. The Design of Tool Wear Compensation System Based on Piezoelectric Actuator,TG71
  5. Study on Weldability of Inconel601 and Clamping Fixture of Double P Combustion Tube,TG132.32
  6. Research on High Speed Machining Using FEM Simulation Approach,TG506.1
  7. Cutting Performances of Ceramic Tools in Dry Cutting of Austenitic Stainless Steels,TG501
  8. Preparation and High Temperature Corrosion Resistance of Cr-Al Coating on the Surface of Ni Based Superalley,TG174.4
  9. Research on Tool Real-time Monitoring Based on Cutting Force and Cutting Temperature,TG714
  10. Experimental Research on Cutting Force and Tool Wear of GH4169,TG506
  11. Study on Action Experiment with Ultrasonic Processing Emulsion to Improve Its Cooling and Lubricant Capability,X703
  12. Study on Mechanical Properties and High Temperature Oxidation Behavior of Light MA/ ODS Nickel-based Superalloy,TG132.32
  13. Research on Milling Performance of Austempered Ductile Iron,TG54
  14. Unidirectional Solidifica Tion of a Kind of Nickel Base Single Cryst Alsuperalloy,TG132.32
  15. Investigation on the Hot Corrosion Resistance of Four Ni-based Superalloys,TG132.32
  16. Of fuzzy interpolation theory in the automatic tool compensation,TP273.4
  17. Research on the Cutting Tool State Monitoring,TG501.3
  18. Experimental Study of the Cutting Properties of Cermet Cutter,TG711
  19. Research on Rare Earth Modification and Cutting Mechanism of Die-Cast Magnesium Alloy AZ91,TG136.1
  20. Study on Action Mechanism and Experiment with Water Vapor as Coolants and Lubricants in Green Cutting,TG501.5

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > General issues > Metal cutting process
© 2012 www.DissertationTopic.Net  Mobile