Dissertation > Excellent graduate degree dissertation topics show

Air rushing Twist Drill Dental Research

Author: LiWei
Tutor: HuangZhiQiang
School: Southwest Petroleum University
Course: Chemical Process Equipment
Keywords: air percussion-rotary bit cemented carbide teeth wear resistance impact resistance mechanical analysis
CLC: TE921.1
Type: Master's thesis
Year: 2011
Downloads: 95
Quote: 0
Read: Download Dissertation

Abstract


In this paper, we analyzed two question that are wearing and fracture of air impulse rotary drill bit teeth in field use. On the one hand from cemented carbide material standpoint, study the effects of teeth wear resistance and impact resistance with different WC grain sizes,and find the better cemented carbide materials which can meet the requirements of the teeth of air percussion-rotary bit. On the other hand make a mechanical analysis on side teeth,research the inclination of side teeth, teeth height as well as the teeth shape’s effects on side teeth’s peril points stress. Then find reasonable parameters of the side teeth and reduce the chance of side teeth fragmentation. Achieve improving wear resistance and impact resistance and reduce the stress side of teeth through researching cemented carbide materials and analysising mechanical of side teeth. So as to achieve the purpose of improving the service life. The thesis’s primary research work is as follows:(1) The scene investigates and studies on air percussion-rotary bit. Through researching literature on the overseas and domestic present status of drill teeth materials(cemented carbide materials), comprehend the cemented carbide characteristics, the development state and the reseach level. On the basis of previous research find cemented carbide teeth materials which can adapt to the requirements of air percussion-rotary bit. Meanwhile make an investigation and analysis on the mechanical of home and abroad bit teeth and provide experience in mechanical analysis of the teeth of this thesis.(2) Failure analysis of air percussion-rotary bit teeth. Include tooth failure modes, failure mechanisms and failure reason analysis. Through the failure analysis of air percussion-rotary bit teeth,understand the failure reasons of drill, failure mechanism and provide a basis for further study.(3) Researching on air percussion-rotary bit tooth materials. Mostly use experimental study means to research the affect of WC’s grain size on wear resistance and impact resistance of cemented carbide materials. Use WC powder preparation technique, forming compact sintering technology and subduing growth of WC grain size technology as well as preparatian procedure to product finished teeth after confirming the reasonable WC grain size. Through tooth performance test, microstructure analysis, wear resistance and impact resistance experiments, well develop cemented carbide tooth materials which can meet the requirements of the air percussion-rotary bit.(4) Mechanical analysis of air percussion-rotary bit. Through mechanical analysis of drill tooth in downhole, establish the mechanical model for calculation, identify the suspicious dangerous point within teeth, analyse the relationship between every stress of suspected dangerous points and the tooth height, inclination, radius and tooth form of drill side teeth. Then comfirm more rensonable ones.

Related Dissertations

  1. Research and Development of Wear Resistance for Physically Disabled Men Jackets,TS941.2
  2. New motorcycle protective gear developed simulation study of its protective properties,U483
  3. The Research on Wear Behavior of High Chromium White Cast Iron and 7CrMnMoS Steel,TG143.1
  4. Study on High Wear-Resistant Alloy Steel Flux Cored Wires for Arc Spraying and Its Application,TG422.3
  5. 15Cr2Ni3MoW head steel oxidation behavior and performance of the organization of the oxide film,TG174.44
  6. Mold material laser surface hardening technology research,TG156.99
  7. Research on the Structure and Material of the Composite Tunnel Pavement,U416.217
  8. Lancang old factory galena soft rock roadway deformation mechanism analysis,TD325
  9. Study of Karst Tunnel Construction Technology on the Sector Ⅰ of Liupanshui-Zhanyi Double-Track Railway,U455.49
  10. Electrospun SiO2 Fiber and Its Application on Toughening Polypropylene,TQ325.14
  11. Preparation of Micro Arc Oxidation Ceramic Coatings and the Research of Interfacial Bonding Strength,TG174.453
  12. Design and Simulation of Impact Resistence Testing Machine for Aircraft Carrier Runway Coat on Virtual Prototype Technology,TH873.4
  13. Research on Optimization of Structure and Process Parameters for SiP Based on Interface Strength,TN405
  14. Low C / N nitrification and denitrification Factors and System Stability,X703.1
  15. Dynamic Mechanical Analysis of the Bioprosthetic Heart Valve Based on ANSYS/LS-DYNA,R654.2
  16. Surface Modification of WC-Ni Hard Alloy by High-Intensity Pulsed Ion Beam Irradiation,TG135.5
  17. Study on the Development and Performance of Novel Ceramic Tools Based on Al2O3,TG711
  18. Microstructure and Wear-resistance of Fe-C-Cr-V-Ti High-boron Hardfacing Alloys,TG455
  19. Study on the Performance of Resistance Water Damage Hard Asphalt and Asphalt Mixture,U414
  20. The Friction and Other Perperties Test and Analysis of Doped Nano-SiO2 Concrete,TU528

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Drilling machinery equipment > Drill bits,drilling tools > Drill
© 2012 www.DissertationTopic.Net  Mobile