Dissertation > Excellent graduate degree dissertation topics show
Balance Optimization and Simulation Research for Inertia Force in Ultra High Speed Stamping Machine
Author: BaiJianYu
Tutor: WangWanLiangï¼›WangLiQun
School: Zhejiang University of Technology
Course: Computer technology
Keywords: ultra high speed stamping machine inertia force balance simulation integrated optimization
CLC: TG305
Type: Master's thesis
Year: 2011
Downloads: 58
Quote: 1
Read: Download Dissertation
Abstract
|
Extremely high inertia forces will be generated in stamping machine when stroke speed falls in range for ultra high speed stamping machine. Difficulties in research and development are how to lower the inertia forces. The research for the balance of inertia forces is very important, and directly influences the quality of machine. On this problem, the following aspects have been studied in this thesis.Firstly, the research and design of the main movement mechanism and balancing mechanism in stamping machine CGB25 are carried out. And the CGB25 three-dimensional solid model was built up using Pro/Engineer. Simultaneity, the kinematics, dynamics simulation and calculation for major parts of stamping machine CGB25 are carried out.Iit is the foundation for study.Secondly, the kinematics, dynamics analysis and calculation of slider crank mechanism and stamping machine CGB25 are carried out using simplified model. And the effectiveness of the proposed balancing mechanism is validated through computer simulations.Lastly, by analysis and comparison of several methods for the balance of inertia forces, proposes an approach for completely balancing out the inertia forces, and an approach for partially canceling the inertia force. Finally, proposes an integrated optimization approach for balance of inertial force in ultra high speed stamping machine based on multi-objective function optimization.
|
Related Dissertations
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
- Study on Springback of High-Strength Steel Stamping,TG386
- Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
- Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
- Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
- Research on Orbital Control Method for Space Rendezvous and Docking,V526
- High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
- The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
- Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
- Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
- Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
- Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
- Numerical Simulation of Biomass Direct Reburning,TK16
- Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
- Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
- Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
- Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
- Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > General issues > Pressure processing equipment
© 2012 www.DissertationTopic.Net Mobile
|