Dissertation > Excellent graduate degree dissertation topics show

Study on Chemical Coloring and Sealing Processing of Stainless Steel

Author: LiuWei
Tutor: NiuDun
School: Northeastern University
Course: Applied Chemistry
Keywords: Stainless steel Coloring Chemaical Oxidation Corrosion resistance Recycle
CLC: TG177
Type: Master's thesis
Year: 2009
Downloads: 61
Quote: 0
Read: Download Dissertation

Abstract


With the development of economy the stainless steel has been wildly used in many fields with its favorable corrosion resistance and attrition resistance and mechanical working properties. It can get a new ideal menterial with metal color and higher corrosion resistance by suface coloring on stainless steel, which can take the fation of increasing erosion resistance and decoration.Major content of this paper is listed as follows:(1) By analying the influence of the CrO3、H2SO4 concentration, coloring temperature and the amount of additives on the oxidation coloring result, to determine the best technical parameters through the oxidation mechanism.(2) By comparing the impact of different methods of sealing process to stainless steel corrosion resistance of colored films to determine the best treatment process.(3) Through analysing the failure reasons of coloring solution and the effect on rebirth, analysing the regeneration of the two methods of being oxidized by KMnO4 or (NH4)2S2O8.The results show that:the concentration and temperature can accelerate the coloring speed and affect the appearance quality of the film; the additive can improve the gloss colored membrane and increase the corrosion resistance and attrition resistance; after the film is sealed the corrosion resistance is increased which has the highest corrosion resistance after double sealed; through analysing the film by SEM and EDS, we know that the film is made up of Cr、Fe、Mn and their oxide form. It’s sueface is compact and smooth, without obvious disfigurement. Through analysing and compareing, we foud that the recycle methods of being oxidized by KMnO4 or (NH4)2S2O8 were feasible, and the method of being oxidized by KMnO4 was suited that it was used in factory which has a lot of coloring solution, the method of being oxidized by (NH4)2S2O8 was suited in laboratory which has a small quantity of coloring solution.

Related Dissertations

  1. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  2. Environmental Effects of Poisonous and Harmful Substances in the Typical Industrial Solid Wastes,X705
  3. Biocompatibility Modification of Solid Materials Via Living Free Radical Polymerization,O631.3
  4. Study on the Microstructures and Properties of N-alloyed Low Carbon Martensitic Stainless Steel,TG142.71
  5. Effects of Environments on Fracture Toughness and Fracture Behavior of 304 Stainless Steel,TG142.71
  6. Study of the Preparation and Properties of the Trivalent Chromium Black Passivation with Non-cobalt Sulfate System,TG174.4
  7. Research on Preparation of Dopamine Composite Films on Stainlees Steel and Corrosion Resistance,TG174.44
  8. Stainless Steel Bright Annealing Furnace with Waste Heat Recovery Energy-saving Technology Research,TG155.1
  9. Several Ladles Pouring Together for Large Super-low-carbon Stainless Steel Casting,TG260
  10. Electroless Ni-Pon the Bulk Nanocrystalline Ingot Iron,TQ153.1
  11. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  12. Studies on Hard Films of Stainless Steel by Magnetron Sputtering,TG174.44
  13. Study on Thermal Calculation in Boilers with O2/CO2 Recycle Combustion,TK222
  14. The Study of AlCoCrTiNiCu_x High Entropy Alloy for the Microstructure and Properties,TG132.3
  15. Stainless steel fuel cell bipolar plate and its experimental and simulation,TM911.4
  16. 316LN austenitic stainless steel stress corrosion cracking of welded joints,TG407
  17. Advanced reactor candidate materials for micro- structural analysis,TL341
  18. ZA35 alloy elements Zr on Microstructure and Properties,TG131
  19. Mg-Li alloy surface CrN Films and Research,O484.1
  20. Application of Data Mining in the Preparation of the Ceramic Coating,TG174.453
  21. Surface Modification of AZ31 Magnesium Alloy and Pure Titanium by High Current Pulsed Electron Beam,TG166.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Metal coloring
© 2012 www.DissertationTopic.Net  Mobile