Dissertation > Excellent graduate degree dissertation topics show

Study on Microstructure and Performance of Laser Cladding Ni-Based Amorphous Alloy Coatings

Author: JiaMengDong
Tutor: LiGang
School: Liaoning Technical University
Course: Materials Science
Keywords: Laser cladding Amorphous alloy coatings Microstructure Mechanical properties Corrosion
CLC: TG174.4
Type: Master's thesis
Year: 2011
Downloads: 59
Quote: 0
Read: Download Dissertation

Abstract


In order to study Ni-based amorphous alloy coatings could be formed on 45 steel substrate surface with laser cladding method, the author use the principle of the three clusters and the amorphous line of the law of composition rules and chose Ni59.35Nb34.45Sn6.2,Ni42Zr30Ta28,Ni60Zr20Nb15Al5 which has a great glass-forming ability (GAT in Conventional preparation methods of amorphous alloys. Using the DL-HL-T5000B CO2 laser artifactitious machine to prepare amorphous alloy coatings on 45 steel. The microstructure, mechanical and corrosion distribution of laser cladding in different output power was analyzed theoretically and the result was confirmed. The SEM picture of coating, micro-hardness and corrosion data was also obtained. The results showed that: the cladding coating was formed of the cladding coating, combined zone and the heat-affected zone, the phase including amorphous phase and crystal phase;when the laser output power is 3300W,the surface of cladding coating had the highest hardness; which reached to 1796.4HK,the surface wear rate is 0.778g·mm-2;the cladding Ni42Zr30Ta28 coating had the best corrosion resistance due to amorphous coating,the sample weight per unit area is 0.0026g·mm-2, salt spray test reach to the best.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  4. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  5. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  6. Research on Mechanical Properties of Concrete with Multi-Component Admixture,TU528
  7. Study on Morphological Evolution and Toughening Mechanism of Sandbag Microstructure-toughened PA6/EPDM-M/nano-CaCO3 Ternary Composites,TB33
  8. Study on Influence of Preferred Orientation on Mechanical and Recoverable Properties of TN479 Shape Memory Alloy Sheet,TG139.6
  9. Study on Chemical Coloring and Sealing Processing of Stainless Steel,TG177
  10. Research on Preparation of Dopamine Composite Films on Stainlees Steel and Corrosion Resistance,TG174.44
  11. Study on Laser Surface Modification of Two Kinds of Super-alloys,TG174.4
  12. Study on Preparation and Performances of Lignin-based Epoxy Resins,TQ323.5
  13. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  14. Studies on Hard Films of Stainless Steel by Magnetron Sputtering,TG174.44
  15. Electrochemical Model of Corrosion Rate of Steel Bars Embedded in Concrete in Different Corrosive Environments,TU375
  16. Research on Bamboo Flour/Polypropylene Composites,TQ327
  17. Electrochemical Corrosion Behavior of Carbon Steel Under the Combined Electrolyte Layer of Open and Confined Layer,TG172
  18. The Study on Corrosion Inhibitors in the Environment of High Temperature and High Pressure H2 S/CO2,TG174.42
  19. The Manufacture and Properties Studies of PTFE Architectural Membrane Structure Materials,TU599
  20. Remote Corrosion Monitoring System of Concrete Structures,TU375
  21. Research on Texture Synthesis and Transfer,TP391.41

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology
© 2012 www.DissertationTopic.Net  Mobile