Dissertation > Excellent graduate degree dissertation topics show

Development and Research of the Measuring and Controlling System on Virtual Instrument

Author: CaoAiHu
Tutor: HuMing
School: Northeastern University
Course: Mechanical Manufacturing and Automation
Keywords: virtual instruments LabVIEW dynamic test MR damper damping control
CLC: TH703
Type: Master's thesis
Year: 2010
Downloads: 102
Quote: 1
Read: Download Dissertation

Abstract


The virtual instrument (Ⅵ) technology has been widely used in measurement field since been developed. In overseas, theⅥhas many examples in control field, but in home, there are few. The research about applications ofⅥin control field is not comprehensive neither in overseas or in home. One of the key points of this article is the research ofⅥin semi-active vibration control system.First, this article analyzes the basic theory ofⅥand design of testing system and control systems. Then, on the study of mechanical arm, the dynamic testing system and semi-active vibration control system are established by using Lab VIEW platform, applying of PCI-6221 data logger board and signal disposal and other hardware.The testing system consists of sensors, appropriate adjuster, integral circuit, filter circuits and other hard wares. Designing the programs of data acquisition and preservation, data play-backing and pretreatment, time domain processing and frequency domain analysis completing vibration signals acquisition, display, storage, playback, time domain processing and Frequency Domain Analysis. Based on the mechanical arm of the dynamic testing experiment, the result is got the Lab VIEW test system for structural dynamic testing is feasible.In the experiment part, first, confirming the feasibility of the dynamic testing system designed on Lab VIEW platform by the hammer experiment. Second, applying the MR damper and its controller to mechanical arm system. Establishing the control system on Lab VIEW platform based on the Bang-Bang control and fuzzy control strategy. Collect the excitation signal and response signal in the hammer experiment and Analysis the amplitude frequency characteristics to study the control system, comparing amplitude-frequency characteristic curve and the peak value under different circumstances to get the conclusion: control system based on virtual instrument applied for the structure of semi-active damping control is effective and feasible.

Related Dissertations

  1. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  2. Design and Realization of Signal Distortion Measurement System Based on Virtual Instruments,TP274
  3. Theory Research and Simulate of Restrain Lathe’s Tool Post Vibration in MR Damper,TB535.1
  4. Design and Control of Intelligent Bionic Leg Base on Hybrid Actuation,TP242
  5. The Research and Design of a Fire Detection System Based on Combustion Audio Recognition,X924.4
  6. Study on Control of Vehicle Semi-active Suspension Based on MR Damper,U463.33
  7. Dynamical System Design and Experimental Study of the Electric Bus,U469.72
  8. Research and Realization of Return-to-center & Damping Control Strategy for Electric Power Steering System,U463.4
  9. Research on the Control System of Semi-active Suspension,U270.3
  10. Research on Control Process of Laser Cooling and Capture Atoms,O431.2
  11. Study on MgB2 Supperconducting Receiving Coil,O482.531
  12. Research on the Mr Damper Control System and Experiment of Shear-type Mr Damper,TB535.1
  13. The Design for DQPSK Testing System,TN929.1
  14. The Research of Radio-frequency Label Impedance Test Based on LABVIEW,TN820
  15. The Design of Virtual Simulation Platform Based on LabVIEW,TP391.9
  16. Research on State Detection of Shield Machine Based on LabVIEW,TP391.9
  17. Clutch comprehensive performance test bed control and fault diagnosis system,U467.5
  18. Research of Mould Breakout Prediction System Base on Virtual Instrument,TF345
  19. Research and Design of Virtual Oscillograph Based on ARM9,TM935.3
  20. Application and Research of Virtual Instruments Technology in the Power System Measuring,TM933.4
  21. Materials and structures damping characteristics and application of measurement,O329

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > General issues > Structure
© 2012 www.DissertationTopic.Net  Mobile