Dissertation > Excellent graduate degree dissertation topics show

Research on the Improvement of Electric Field of the Composite Insulators End

Author: HuangXingMin
Tutor: ZhangWeiXing；LiuRenChen
School: Shandong University
Course: Electrical Engineering
Keywords: New composite insulator with low electric field intensity Electric field at the end Platform-type hardware Grading ring ANSYS
CLC: TM216
Type: Master's thesis
Year: 2011
Downloads: 113
Quote: 0
Read: Download Dissertation

Abstract


The composite insulators, which are widely used in the power system, are extended with the purpose of avoiding the pollution flashover effectively. But in the recent years, pollution flashover still took place on a number of composite insulators. The pollution flashovers almost all cause the damage of the grading ring, the hardware at the end, and the shed, sheath around the hardware, making the insulators drop and the lines break, leading to a great number of economic loss.In this paper, the exsiting calculation methods of composite insulator’s electric field are summarized and the mathematical model of calculating the composite insulator’s electric field is established, on the basis of which the distribution of composite insulator’s electric field along the surface under clean and polluted conditions is analysed, and the influence of grading ring on the distribution of composite insulator’s electric field and its limitations are also discussed. Based on the ideas that "Extending the edge of the hardware can ameliorate the electric field intensity around the stick", a new platform-type hardware is proposed creatively, with the purpose of producing new composite insulator with low electric field intensity. Using the methods of theoretical calculation, Simulation Calculation using ANSYS and test, under the dry and wet conditions, the electric field intensity at the end of the composite insulators with new hardware and common hardware is calculated, including the maximum electric field intensity around the hardware, the maximum electric field intensity around the first shed and the the maximum electric field intensity on the stick. The influence of platform radius and thickness of the new hardware on the electric field at the end of composite insulator is also analysed. Through the comparison of the influence of common hardware and new hardware on the electric field at the end of composite insulator, proving that the new composite insulator with low electric field intensity can improve the inception voltage of the corona on the hardware at the side of the high-voltage and also decrease its electric field intensity. Using the new composite insulator can eliminate or reduce the pollution flashover. This research has some academic value and applications.

Related Dissertations

  1. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  2. Major Structural Intensity Analysis of Breaking Rotary Drum Dryer,TK173
  3. Slope Finite Element Generalized Reliability Algorithms,TD824.7
  4. Dynamic Characteristic Simulation and Study of Sliding Coal Plow,TD421.62
  5. Pipeline Leakage Detection Technology within the magnetic axis,TH878.3
  6. Under the action of internal waves portfolio performance analysis of shell structure,TV139.2
  7. Research and Application on Parallel Gap Lightning Protection Device,TM216
  8. Design of the ZJ50/3150LDB Derrick and Finite Element Simulation Computation Analysis,TE923
  9. Numerical Simulation of the Flow Line of SCR and Seafloor Interaction,TE952
  10. Lancang lead-zinc tuff soft rock failure mechanism analysis and optimization of supporting parameters,TD353
  11. Dahongshan Iron I copper belt sublevel open stope Optimization of Structure Parameters,TD862.1
  12. Research on Mechanism and Experi-Ments of Wire Electrode Wear in Wedm,TG484
  13. Parametric model of research -oriented energy optimization slab heating characteristics,TG335.3
  14. Mechanical Properties of Single Lap-jointed SPR Joints,TG115.5
  15. Study on Properties of Solid Particle Erosion Resistance CrN_X Coating,TG174.44
  16. Strength Analysis and Structure Improvement of the Key Component of Ladle Turret,TF341.6
  17. The Thermal Properties of Woodworking Spindle Without Load,TS642
  18. The Finite Element Simulation of Complex Structure,O327
  19. Deep-sea microbial acquisition system simulation and experimental study,Q938.8
  20. For small spacecraft cone - rod flexible wall docking mechanism design studies,V526
  21. Weight function based on ANSYS thermal analysis system development technology research,TH123.4

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Insulating materials,dielectric,and its products > Insulator and casing
© 2012 www.DissertationTopic.Net  Mobile