Dissertation > Excellent graduate degree dissertation topics show

Three Dimension Finite Element Structure Dynamic Analysis of Tall Ship-lifted Building

Author: DengXiaoShan
Tutor: ZhangLiXiang
School: Kunming University of Science and Technology
Course: General and Fundamental Mechanics
Keywords: Ship Lift Modal Analysis Response Spectrum Time-History Viscous-Spring Artificial Boundary
CLC: U642
Type: Master's thesis
Year: 2011
Downloads: 25
Quote: 0
Read: Download Dissertation

Abstract


Nowadays, with the rapid development of the domestic transport and the hydroelectric industry, a large number of high head, high-capacity hydropower stations have been built. In this case, the dam navigation has become an urgent problem but it has not been completely solved. As another navigation building in addition to lock, ship lift has a lot of advantages, such as less water consumption and investment, low cost and over boat speed. The Research and development of ship lift have been reached a consensus in the domestic water conservancy circles. Hydraulic ship lift belongs to large-scale and stress complex space thin-wall construction. It is a new project of system which combines lock filling and emptying system, ship hydraulics, ship lift machinery, structure, operation detection and computer monitoring technologies together. The important content in anti-seismic design of structure is to evaluate and ensure the reliability of this ship lift under the seismic force. However, there are little researches in this field in China and abroad. Moreover, there isn’t a mature design specifications of the hydraulic ship lift. Because of this, the engineers can only draw lessons from the standards and specification in foreign countries.China is a country which often suffered from earthquakes with the characteristics of high frequency, high strength, wide distribution and shallow position of the seismic source.From the dynamic analysis of a ship lift under the seismic load, we can not only ensure the structure in safe operation normally, but also can make sure that it have enough safety that doesn’t let the so-called phenomenon "Ordinary incentive but Huge response" happen while encountering the earthquake.Based on collecting and summarizing the experience of the predecessors, this paper uses a large general finite element software ANSYS to analyze, combined with the real project of a certain ship lift in Yunnan province. Firstly it calculates the stresses and the deformation of the ship lift tower. Then it takes a dynamic analysis of the tower using the mode analysis response spectrum method and the dynamic time-history analysis method respectively. The contrast between the results under the viscous-spring artificial boundary and the fixed boundary using the dynamic time-history analysis method are also showed. In the end, it gives a final evaluation on the rationality of the design, the whole and the local safety of the structure.

Related Dissertations

  1. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  2. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  3. Multi-storey Steel Structure Design Method Based on Optimum Lateral Stiffness Distribution,TU973.13
  4. Analysis and Evaluation of Some Heavy Truck Drive Axle Housing’s Static and Dynamic Characteristics,U463.218.5
  5. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  6. The Design and Research of a New Type of Clamping Elements for Roller Guide,TG659
  7. The Ultimate Load and Dynamic Analysis of Transmission Tower Frame,TM753
  8. Study on Yield Mechanism of Reinforced Concrete Frame Structure’s Strong Column-Weak Beam under Rare Earthquake Action,TU275
  9. Experimental Analysis of Boom Vibration and Stress Calculation of Pipe for 46D Truck-mounted Concrete Pump,TU646
  10. Study on Aseismic of Frame Structure with Weakness Story at Bottom Considering Filled-wall Influence,TU352.11
  11. Parallel six-dimensional shaking table Design and Research,TH762.2
  12. Vehicle-mounted snubbing workover rig derrick Design and analysis,TE935
  13. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  14. Direct-drive A / C -axis CNC universal milling head swivel double Finite Element Analysis,TG547
  15. Car engine mounting system research,U464
  16. Based on the finite element analysis to improve the design of medium-duty truck chassis and Test Research,U463.32
  17. Span steel arch structure seismic performance of,TU352.11
  18. After installation of central brake transmission housing improvement , simulation and experimental study,U463.212
  19. Board structure acousticst sound power modal analysis,U661.44
  20. Baseband chip finger -joint design and research of CNC punch press,TG385.1
  21. Cracks in asphalt pavement structure with finite element analysis,U416.217

CLC: > Transportation > Waterway transport > Navigation structures and aids to navigation > Shiplift
© 2012 www.DissertationTopic.Net  Mobile