Dissertation > Excellent graduate degree dissertation topics show
Numerical Simulation of Coal-Gas Coupling in Coal Road Heading Face of Driving by Blasting
Author: LiYe
Tutor: LiangBing
School: Liaoning Technical University
Course: Fluid Mechanics
Keywords: coal road heading face of driving by blasting coal methane gas dynamic load coal-gas coupling Comsol
CLC: TD712
Type: Master's thesis
Year: 2011
Downloads: 154
Quote: 0
Read: Download Dissertation
Abstract
|
Coal industry is basic occupation and pillar industry in our national development. It props national economy up sound and fast development. But, coal and mining industry is one of the most serious disasters. Methane accident makes the most serious extent of damage to people and equipments.Methane flowing law in coal is key point to coal mine safety. Taking methane gas compressibility and desorption into account, supposing methane follows Darcy law, we found coal-gas coupling mathematical model. Using Comsol software, we simulate gas migration law in coal by blasting. The results show: displacement and stress curves turn to be fluctuating, but placid by machine. The maximum values of displacement and stress by blasting is bigger than by machine. Tunneling by blasting has little affect to gas discharge law. At the moment of blasting, there is a high load on coal. As time goes on, stress field and gas migration field by blasting and machine have the same laws. Stress and displacement alterations by blasting are bigger than coupling. The impact of coupling must be taken into account by machine. Methane pressure is changing by time and is depressed near tunnel. Two sides of tunnel appears opposite displacement and the maximum value is 7.7mm. The maximum value of z-displacement is 35mm which appears on top of the tunnel. The contour of displacement on top of the tunnel turns to be“O”type. The maximum value is at the centre of“O”type.
|
Related Dissertations
- Experimental Study on Slope Destruction under Dynamic Load,TU43
- Evaluation of the Temperature Field during Friction Stir Welding and Characterization of Weld for 2017 Aluminum Alloy,TG453.9
- Deformation Characteristics of Saturated-Unsaturated Soil under Elastic Modulus Varying with Depth,TU43
- Topology Optimization of Muffler Internal Configuration for Acoustical Performance,TB535.2
- Research on Design Technique of An 80T Pulsed High Field Magnet,TM53
- The Dynamic Calibration of Distribute Load Identification on Complex Structures,O347
- Analysis of Response Caused by Dynamic Load on Horizontal Axis Wind Turbine,TK83
- Effects of Pipe Diameter and Dynamic Load on the Flow and Heat Transfer Characteristcs of Two-phase Boiling Flow,TK124
- Analysis and Optimization on An Optical Switch Based on Micro-fluidic Control Technology,TN252
- Research on Electrical Capacitance Tomography System to Forward Problem and Image Reconstruction Medthods,TP391.41
- Study on the Stability of the Emulsion Explosive Through Change the Way of Sensitization,TQ560.1
- Research on Application Technology of Non-linear Insulating Materials in High-voltage Cable,TM215.92
- Simulating the Forward Problem of Magnetoacoustic Tomography with Magnetic Induction (MAT-MI) and Experiment Study,R318.0
- Hydraulic and Mechanical Coupling Dynamic Analysis of Passive Hanging Heave Compensation Device,P752
- Designing of Virtual Analyse Instrument on Identify Distribute Dynamic Load,O347.1
- Study on Numerical Simulation of Migration Rules of Water-coal Gas in Low Permeability Coal,P618.11
- Multi-physics Analysis of ITER External Bypass Cabinet by Heat, Electricity, Magnetic,TM461
- Flatness Measurement System for the Brakes’ Steel Back,TG83
- Design of Interface in C/C Composites and Simulation of Multi-field Coupling,TB332
- COMSOL -based platform for Structural Topology Optimization Method,TH122
- Multi-physics Modeling and Numerical Simulation of Electrohydrodynamics Air Pump,TP391.9
CLC: > Industrial Technology > Mining Engineering > Mine safety and labor protection > Mine atmosphere > Mine Gas
© 2012 www.DissertationTopic.Net Mobile
|