Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation Study on Dust Pollution Mechanism and Control Technology of Coal-falling Tower in Open Coal Storage

Author: HuangShuai
Tutor: GeShaoCheng
School: Liaoning Technical University
Course: Safety Technology and Engineering
Keywords: coal-falling tower numerical simulation two-phase fluid dust pollution mechanism
CLC: TD714
Type: Master's thesis
Year: 2011
Downloads: 67
Quote: 1
Read: Download Dissertation

Abstract


The aim of this paper is mainly to study the main coal-dust pollution sources-a coal-falling tower in the four coal preparation plants of Ping Shuo Branch of China National Coal Group. Through the combination of many measurement data with numerical simulation of gas-solid two-phase flow, using a numerical simulation software to analyze dust precipitation mechanisms and dissipation laws of coal-falling tower in a open coal storage. Dust pollution of the coal-falling tower is caused by the induced feeding wind-flow with itself, when falling coal, which is called the first induced feeding wind-flow. When the coal falling , it was accelerating with the action of acceleration, on the surface of high-speed coal falling formed negative pressures, so have the second induced feeding wind-flow from the leak of the mouth and the wall of the coal-falling tower. The first and the second induced feeding wind-flow are stack up to form the high-pressure air in the coal-falling tower. With the falling coal on the mouth of coal-falling tower, the dust with the high-pressure air is poured forth. In the view of this situation, the coal dust removal technology that decorated joint fan and spray tower is proposed. Through establishing the multiphase flows mathematical model based on induced flows mechanism, by using the method that is called Lagrange numerical simulation, and find out the influencing factors of the dust removal efficiency and quantitative analysis it. The simulation result and the actual result verify the above dust control plans. The study methods and results provide a guide for the dust control in a open coal storage, such as each big mining areas, coal-fired power stations, chenical plants.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Experimental Study and Mechanism Analysis on Particle Spray Agglomeration from Coal Combustion,X513
  6. Study on Dust Concertiation Measurement Technique Based on Optical Back-Scattering,X831
  7. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  8. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  9. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  10. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  11. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  12. Numerical Simulation of Biomass Direct Reburning,TK16
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. Lightweight Aggregate Made from Waste Residue of Construction、Reclamation of Waste Foundry Sand Dust and Sludge,TU528.042
  21. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3

CLC: > Industrial Technology > Mining Engineering > Mine safety and labor protection > Mine atmosphere > Mine dust
© 2012 www.DissertationTopic.Net  Mobile