Dissertation > Excellent graduate degree dissertation topics show

Research of Properties and Preparation Technology of Multiphase Ceramic Coating with Reactive Flame Spraying Process on AZ31B

Author: LiSongHu
Tutor: ShiHaiFang
School: Liaoning Technical University
Course: Materials Processing Engineering
Keywords: AZ31B ordinary thermal spraying SHS thermal spraying Al2O3/TiO2 multiphase creamic coating mechanicl properties
CLC: TG174.44
Type: Master's thesis
Year: 2011
Downloads: 44
Quote: 0
Read: Download Dissertation

Abstract


In this study, Al2O3/TiO2 multiphase ceramic coating was prepared on the surface of AZ31B magnesium alloys by the ordinary thermal spraying and SHS thermal spraying. Resarch of micro-morphology, element distribution, phase composition and other microscopic features of the Al2O3/TiO2 multiphase creamic coating on AZ31B by SEM, XRD, EDAX and other methods. Analyze of the effects of coating’s components and performance with the change of the proportion of Al to CuO in thermite and thermite to ceramic aggregate. Test of the micro-hardness, bonding strength, thermal shock resistance performance, wear resistance, corrosion resistance and other performances of the Al2O3/TiO2 multiphase creamic coating on AZ31B.The results show that: the best ratio of spray powder is that Al to CuO in thermite and thermite to ceramic aggregate are 3:1 and 1:1. SHS reaction ceramic coating has metallurgical bonding, elements distributed uniform and Cu4MgO5, CuAlO2 and so on we found by X-ray. Porosity of SHS reaction ceramic coating is 15.15%, which decreased to 0 by sealing of hole. Microhardness and bonding strength aggregate are 998.78HV and 7.72MPa of SHS reaction ceramic coating. Thermal shock times respectively can reach 40 and 30 in 400℃and 500℃. The tests of abrasive wear resistance, adhesion dry-abrasion resistance and adhesion oil-abrasion resistance show that wearing resistance of SHS reaction ceramic coating was respectively 6.48, 3.32 and 6.04 times of the substrate’s. Corrosion resistance of the SHS reaction ceramic is 5% acetic acid and 3.5% NaCl solution is respectively 24.37 and 7.15 times of the substrate’s.Two methods of thermal spray coating system in the comparison found: preparation of the SHS-sprayed ceramic coatings in the micro-hardness, bonding strength, porosity and other mechanical and physical characters are superior ordinary thermal spraying of the ceramic coating.

Related Dissertations

  1. The Numerical Simulation of Magnesium Alloy AZ31B Spot Welding on SYSWELD,TG453.9
  2. Fabrication Process of Magnesium Alloy Foil,TG339
  3. Effect of Tribology and Lubrication on Quick Plastic Forming of Magnesium Alloy Sheet,TG39
  4. Research on Forming Limit and Cavity Evolution for AZ31 Magnesium Alloy Sheet under QPF Condition,TG386
  5. Magnesium alloy rectangular box deep drawing numerical simulation of temperature and loading system design BHF,TG386
  6. Hot deformation behavior of AZ31B magnesium alloy sheet,TG339
  7. Thermal deformation on microstructure and mechanical properties of the continuous casting and rolling of AZ31B magnesium alloy,TG146.22
  8. Study on Microstructure and Properties of CO2 Gas Laser Surface Modification on AZ31B Magnesium Alloy,TG175.3
  9. Research on AZ31B Magnesium Hot Incremental Forming,TG389
  10. AZ31 magnesium alloy direct electroless nickel-phosphorus alloy,TG174.44
  11. Study on Hot Spot Stress Approach for Fatigue Evaluation of Magnesium Alloy and Aluminum Alloy Welded Joints,TG407
  12. AZ31B Magnesium Alloy Sheet Plastic Deformation and Its Laser Welding Research,TG146.22
  13. Study on the Laser Surface Melting of AZ31B Magnesium Alloy,TG174.4
  14. Study on Magnesium Alloy Laser Remelting and the Temperature Field Numerical Simulation Based on Infrared Measuring Temperature,TG174.44
  15. Experimental Research on Diffusion Bonding Technology of Commercial Extruded AZ31B Magnesium Alloy,TG453.9
  16. Study on the Fatigue Assessment of TIG Welding Joints of AZ31B Magnesium Alloy by Local Approach,TG407
  17. Study on Microstructures and Mechanical Properties of AZ31B Magnesium Alloy by TIG Welding,TG407
  18. The Research on Friction Stir Welding Process of Magnesium Alloy and Corrosion Protection of the Weld,TG406
  19. Study on Anisotropy of AZ31B Magnesium Alloy Sheet Based on Tensile Mechanical Test,TG115.52
  20. Research on Gas Bulging Forming and Simulation of AZ31B Magnesium Alloy Sheet,TG146.22
  21. Study on Activating TIG Welding Method of Magnesium Alloys,TG444

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology > Metal complex layer of protection
© 2012 www.DissertationTopic.Net  Mobile