Dissertation > Excellent graduate degree dissertation topics show

Study on Hot Deformation Behavior and Microstructure-Mechanical Properties of Cr12MoV Steel

Author: HuangHongTao
Tutor: ZuoHongShuang
School: Northeastern University
Course: Materials Processing Engineering
Keywords: cold working die steel dynamic recrystallization static recrystallization processing map modified treatment
CLC: TG142
Type: Master's thesis
Year: 2009
Downloads: 221
Quote: 0
Read: Download Dissertation

Abstract


Cr12MoV is a cold working die steel which is widely used in die industry.It changes a little in size and is of good hardenability.It can abtain good hardness and abradability at 300℃-400℃.It is a ledeburite cold working die steel,rich in C and Cr.In the background of baosteel special steel corporation Project,that is about the technology research for plate and strip production of special metals and alloys,this article will research into the microstructure change in hot deformation process and the effect imposed by heat treatment parameters on the microstructure and mechanical properties.The processing maps of Cr12MoV steel are drawn from the experiment datas.The microscope deformation mechanisms at different deformation parameters are also researched in this article.All this can provide some help for the production of Cr12MoV steel.The main contents and results are as follows:(1) When single press test is taken, the influence of the deformation temperature, deformation degree and deformation rate to the stress of the steel are researched, and the mathematical model of resistance of deformation is established.(2) The softening behavior of Cr12MoV steel is researched in this article and the mathematical model between peak stressσp and Z parameters is obtained as follows: lnσp=-0.47989+0.116511nZ,the mathematical model between peak strain ep and Z parameters is obtained as follows:lnεp=3.10906 lnZ-13.62152.The activation energy of dynamic recrystallization is 538.712 kJ/mol.(3)When double press test is taken, the behavior of static recrystallization during isothermal process after the hot deformation of the steel in austenitic area is researched.The softening rate curve of the steel to be tested is drawn.(4) Based on the prasad instability criteria, the processing maps of Cr12MoV steel are drawn in this article with the cubic spline used in obtaining the relation beteen logσand logε.The power dissipation coefficience peak value transfer from medium temperature zone to high temperature zone with the increase of strain.The power dissipation coefficience peak value reaches 0.56.It is not advisable the Crl2MoV steel be defoemed below 950℃.The best deformation temperatures range from 1050℃to 1125℃at true strain 0.6 and the deformation rate should not excel ls-1.(5) With the experiment methods such as X rays and energy spectrum,the effect on Cr12MoV steel imposed by quench temperatures and temper temperatures and cooling medium is researched.The quantity of granular carbide decrease with the increase of quench temperature.when Cr12MoV steel is quenched at 900℃. The content of Cr in block carbide increase rapidly with the increase of temper temperature.When Cr12MoV steel is quenched above 900℃, the content of Cr in block carbide almost keep steady with the increase of temper temperature. Comparing with the effect on microstructure by water cooling,we obtain that secondary carbide is smaller in size and more disperse by oil cooling.Spheroidization effect on primary carbide is obvious and the carbide sharp corners become circular,as a result,this can relieve the split effect on matrix imposed by primary carbide.

Related Dissertations

  1. Study on the Hot Deformation Behavior and Processing Map of TC21 Alloy,TG146.23
  2. Study on the Formability of Magnesium Alloy AZ61 and Its Hot Forming Process for Bevel Gear,TG319
  3. Study on Microstructure Stability and Dynamic Recrystallization of GH80A Alloy Used for Steam Turbine,TG132.32
  4. GH625 alloy hot deformation behavior and dynamic recrystallization of,TG132.32
  5. Effect of Rare-earth Elements on Dynamic Recrystallization and Texture of AZ31 Wrought Magnesium Alloy during Hot-rolled,TG339
  6. Hot Deformation Behavior of GH4145 Superalloy,TG115.53
  7. Recrystallized and Structure Conversed Study of Re Heavy Rail Steel in the Course of Hot Rolling,TG111.7
  8. Microstructure Evolution and Numerical Simulation of TC11 Alloy During Compressive Deformation in β Phase,TG115.53
  9. 2124 aluminum alloy homogenized thermal simulation,TG146.21
  10. Research on Effects of Hot Deformation Behaviore of Pipeline Steels for High Pressure Gas Transportaion,TG142.15
  11. Research for Controlling Parameter of Microstructure and Mechanical Properties of Bogie Steel of High-speed Railway,TG335
  12. Study and Development of E40 High Strength Offshore Platform Steel,TG335
  13. Thermo-mechanical treatment for high resistance to damage 2E12 aluminum alloy microstructure and properties of,TG146.21
  14. Research on Hot Deformation Process of 403Nb Heat-resistant Martensitic Stainless Steel,TG335.11
  15. Research and Development of EH40 High-strength Ship Steel,U668.2
  16. Microstructure Evolution of Mg-10Gd-3Y Alloy during Thermal Plastic Deformation,TG146.22
  17. Study on Dynamic Recrystallization Behavior and Thermoplastic Flow Stress of 42CrMo Steel,TG142.15
  18. Research on the TR Method Forging Process of Heavy Crankshaft and Dynamic Recrystallization Simulation,TG316
  19. Experiment Study and Theoretical Analysis on Hot Workability of 7075 Aluminum Alloy,TG146.21
  20. Study on Microstructure and Properties of (WAl12+Al2O3)/Al Hybrid Composites Prepared by In-Situ Reaction,TB331
  21. Research on Massive Spatial Data Distributed Storage and Parallel Processing Technology,TP333

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Steel
© 2012 www.DissertationTopic.Net  Mobile