Dissertation > Excellent graduate degree dissertation topics show

Analysis and Application in Automated Balace of Heating System Based on PLC Control

Author: ZhangWei
Tutor: XiaYongFa
School: Northeastern University
Course: Mechanical Design and Theory
Keywords: heat-supply surpervision and control system PLC approximate module for heat exchange station save energy control opitimize the parameters of PID controller
CLC: TU995.3
Type: Master's thesis
Year: 2009
Downloads: 59
Quote: 0
Read: Download Dissertation


State "Eleventh Five-Year Plan" proposed in the energy-saving targets, in response to the national energy saving plan, all heating companies have around the study of heating network of energy-saving operation, and most of the establishment of a heating network monitoring system. However, because of their lack of regulation of heat network model, the effects of regulation are very poor. It is in this premise of this article under the regulation of how to optimize heating network in order to achieve better energy efficiency.In this paper, a city of the domestic energy-saving heating network against the backdrop of the implementation of the project, both at home and abroad in the full understanding of the status of regulation of heat supply network, as well as methods on the basis of the monitoring center in order to achieve unity by adjusting the balance control of heat supply network model, do the following research work:1. To adjust the heat exchange station effectively it is necessary to build the transfer function for the station. In this topic approximate module is built used some data collected in the local station and based on area method. So the station can be adjusted use PID controller. To assure the stability of the system’s response under the step-input the three parameters of PID controller must be optimized.2. Aftre made clear the way to regulate heating network in the process, established in the control model of heat exchange stations, in order to achieve the purpose of energy conservation, to use PLC to write the procedures to complete the realization of the control system is necessary. It include the framework for monitoring system, regulate the balance of heating network and how to achieve energy-saving; In order to facilitate to govern the heat-supply network and strengthened the reliability of the control system heat-consuming programme is embeded in the PLCs. This part finished by two ways:one is used communicated with intelligent instrument based on modbus protocol and another is used mathematic interpolation based on two dimentional array of water enthalpy. The value computed by the back method compared to the authorized measuring instrument is much closed.

Related Dissertations

  1. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  2. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  3. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  4. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  5. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  6. The Design and Implementation of the Automation Management System of Yongchangjing River,TP315
  7. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  8. Design and Optimization Control of the Electroslag Furnace Atomization Automatic Control System,TP273
  9. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  10. Research on Automatic Measurement Technology of Pitch Diameter for the Rzeppa Joint Housing Raceways,TG80
  11. Wind power generation pitch system design and application,TM315
  12. Vehicle-mounted snubbing equipment maintenance control system design,TE935
  13. Stacker Training Equipment Operation and Monitoring System,TH246
  14. Filter Performance Test System,TH137
  15. TBM cutterhead system synchronization driven research,TM921.48
  16. Configuration Technology-based Water Pumping Station Monitoring and Management System of the Study Design,TP277
  17. Mint production automated logistics system developed,TP273
  18. The Application and Research of Continuous Batch Washer’s Control Technology Based on Clear Rate,TP273
  19. ZQF-80KW DC Motor Energy Feedback Testing Rig Research,TM33
  20. PLC-based grading thick box swash plate Automatic Control System,TP273
  21. Development of Diffusion/Oxidize Process Control System Based on Fieldbus,TP273.4

CLC: > Industrial Technology > Building Science > Municipal Engineering > Urban central heating > Heat pipe network
© 2012 www.DissertationTopic.Net  Mobile