Dissertation > Excellent graduate degree dissertation topics show

Sensing study of the thermal conductivity of fiber Bragg grating temperature sensitive

Author: YangHua
Tutor: LiChuan
School: Kunming University of Science and Technology
Course: Pattern Recognition and Intelligent Systems
Keywords: thermal conductivity steady-state method fiber Bragg gratings thermal sensitization
CLC: TP212.14
Type: Master's thesis
Year: 2011
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


Thermal conductivity is an essential parameter of the thermophysical property of material, which reflects the power of conducting heat along/through the material.In the thermotechnical industry, thermal conductivity is the quantitative basis to ensure whether the material can satisfy the thermal process or not, and it’s also a key parameter, in designing thermal system. The material thermal conductivity becomes an essential way to know the material thermophysical property. The reason that the thermal conductivity of the material are effected by its components, moisture content, temperature, etc.makes the laboratory measurement method the only way to measure the thermal conductivity. But the traditional laboratory measurement method requires fieldwork sampling which usually causes damage to the integrity of the material, thus the on-site measurement can not be carried on. By inserting or burying probe needle in the material, the hot probe method of the hot-wire model at present can measure the average thermal conductivity of along hot-wire of the material but not the partial thermal conductivity.In this article, the fiber Bragg grating sensor for measuring the materials thermal conductivity by using the steady-state method is developed,and the fiber Bragg grating is attached at the surface of the positive temperature coefficient thermistor of heating element with an cylinder-shaped aluminous shell.When the heating element is heated in the material to reach thermal balance and form a steady temperature distribution, which leads to the steady wavelength shifts of the fiber Bragg grating that attached at the surface of the heating element, to achieve thermal conductivity of the partial measurement. The thermal expansion of aluminum shell is larger than the fiber Bragg grating, which causes the additional wavelength shifts of the fiber Bragg grating, increasing the temperature sensitivity of the sensor. The main completed work as follows:1. According to the structure of the sensor, the mathematical relationships between Fiber Bragg grating wavelength shifts and the materials thermal conductivity is established.2. According to the material choice and size design of the sensor, the characteristics of the sensor were calculated. When the diameter of the heating element takes 10.57 mm, working voltage takes 100 V, working internal resistance takes 4040.161Ω.the sensor buried in sandy soil,the initial temperature of sandy soil is 10℃,the thermal conductivity is 0.83 W/m·K. Heating to reach thermal balance, the theory temperature sensitive coefficient of the sensor is 23.6 X 10-6℃-1,wavelength shifts is 1665 pm.3. Through the water-bath method,thermal sensitization of temperature sensor by attaching at the metal surface of the heating element is verified, and sensitive coefficient of experiment is18.32X 10-6℃-1.hen the center wavelength of Bragg grating is1550 nm, and its theory temperature sensitive coefficient is 6.0X10-6℃-1,the temperature sensitive coefficient of this experiment is increased 3.04 times.Each item of static performance indices of sensor as follows:nonlinearity error:1.24%FS;repeatability error:3.47%FS.4.The temperature-rise test of the different material indicates that the variance of the stability wavelengths values of the sensor were significant differences. The maximum difference was 564 pm and 20.4℃about the stability wavelengths values and the temperature values.

Related Dissertations

  1. Study on the Dynamic Thermal Test Device of Sprinklers,TU892
  2. Variable conditions in orbit, the spacecraft solar wing thermal - structural analysis,V442
  3. High thermal conductivity epoxy composites and Research,TB332
  4. Study on the Seasonal Frozen Roadbed Temperature and Deformation of Kangding Section of Sichuan-Tibet Highway,U416.1
  5. Study on Surrouding Rock Thermal Couductivity Experiment and Distribution of Temperature Field in Deep Roadway,TD727
  6. Study on Thermal and Mechanical Properties of Porous Silicon Thermal Isolation Layer Used in Uncooled Infrared Microbolometer,TN215
  7. Study on Special Coating for Thermo-Electric Boiler Protection,TG174.442
  8. Study on the Thermal Conductivity and Radiation Characteristics of Nanofluids,TB383.1
  9. Experiment Study on Heat Transfer Performance for Adsorbent of Composite Nano-SiO2,TB383.1
  10. Design and Research of FBG Sensors,TP212.14
  11. The Calibration of the Ultralow Permeability Measurement Apparatus and Preliminary Experimental Results,P618.13
  12. Research on Preparationand Properties of Phase Change Mortar,TB34
  13. Study on Functional Polymer Matrix Nanocomposites,TB383.1
  14. The Influence of BN and AlN Particles on the Performance of Thermal Conductive Silicone Adhesive,TQ433.438
  15. Research on High Thermal Conductivity Epoxy Casting Compound,TQ433.437
  16. Preparation and Properties of Thermal Conductivity and Insulating Adhesive,TQ437
  17. Particle surface characteristics and mechanism based on fractal theory PIM,TF124.3
  18. Formation and Characteristion of Boron Carbide-carbon Ceramic Composites,TB332
  19. Research and Application of Light Plate Composed with Shale Ceramic,TU528.2
  20. The Investigation of Low Dimensional Thermal Insulations Based on Silica Powder,TB383.1

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor > Physical sensors > Light sensor
© 2012 www.DissertationTopic.Net  Mobile