Dissertation > Excellent graduate degree dissertation topics show

Design of Centralized Control and Supervisal System of a Water Basin

Author: FanGuoLiang
Tutor: LiuSheng
School: Harbin Engineering University
Course: Pattern Recognition and Intelligent Systems
Keywords: testing basin distribute control system centralized control and supervisal system dual-ring redundancy network human-machine interface simulation of network
CLC: TP273
Type: Master's thesis
Year: 2011
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


The paper was based on the scientific research, concentrated on building a centralized control and supervisal system.For the experiments in testing basin are expensive, the processes are complicated, the inveriment is humid, there is severe electromagnetic interference. So a high-performenc control and supervisal system is essential to the testing basin labrory. The research was concentrated on building a centralized control and supervisal system with high-reliability、real-time reaction、multiple and redundant operation methods、universal interface to expend、universal interface of hardware and software.First, The main frame of the centralized control and supervisal system was established based on the theory of distribute control system(DCS), the function of the testing basin and the demanding on electromagnetic interference and inveriment were analysed in detail. The supervisal function was centralized in the main monitor and control room, meantime the functions of control and data-access were decentralized, the risk of system failure was reduced. The function of subsystems and the data for communication were analysed.Then, The communication system was established based on dual-ring redundancy and switched network theory according to the damand of the system.The commom protocols and topologies used in control system were compared, the tolerance of common redundant topologies were compared. The communication system was highly reliable, high-speed in data transfer, full duplex,high-performance in anti-electromagnetic interference.The interface of communication was designed based on PROFINET Component Based Automation.The hardware, software, the expand interface and diagnosis of the communication system were also researched. The field communication system was designed based on profibus protocol, the hardware, software, the expansion interface and diagnosis of the field communication system were also researched.The impression of network delay was analysed,the synchronous clock system was established to reduce the impression of network delay.Then, design for system reliability was conducted on application, controller and programme based on the redundancy theory. The faults could happen were analysed based on fault tree analysis (FTA), the fault tree was developed for diagnosing. The main human-machine interface of the centralized control and supervisal, the alarm interface, the storage system and the field interface of subsystem were established for the operator to monitor and control the experiment.At last, the mathematical model of the communication system was established using OPnet, the capability and extension of the system were simulated and verified.The mathematical model of communication system under fault was established and simulated, the reliability of the system was verified. The system showed a great value with reliability in terrible environment, easy to maintenance, easy to expand and convenient human-machine interface and multiple and redundant operation methods.

Related Dissertations

  1. Design and Research of CT Machine,R197.39
  2. Design and Implementation of PSTN multi signaling point semi-physical simulation system,TP391.9
  3. The Research and Realization of Human Machine Interface Reconfigurable Communication Based on Embedded Linux,TP11
  4. Neural Network Based on Particle Swarm Optimization color injection molding process,TQ320.662
  5. Asian Orbiter ascent Control Method,V448.2
  6. Terminal Automation Control System Design and Implementation,TP273.5
  7. Development of 3-D Micro-cutting Machine Tool Numerical Control System Based on Parker 6K,TG659
  8. Analysis of Power Network Topology and Virtual Load Flow Calculation in Hydropower Simulation Software,TM743
  9. Research on Simulation in Embedded Networks,TP273
  10. The Research of the Simulation for Disaster Relief Communication Network in Military Based on OPNET,TN915.85
  11. HMI (Human Machine Interface) navigation system made ??design and screen transfer,U463.6
  12. The Design of Terminal Hardware in Mobile Communication System,TN929.5
  13. Pan three coal mines , West 8 hydrogeological characteristics of,TD12
  14. Precise Net Tube Machine Control System Design,TP273
  15. Applying Computer Simulation Technology for Project Construction Management,TP391.9
  16. Based on Virtual Reality Technology Experimental Teaching,TP391.6
  17. Research of Synthesized Experiment Platform for Simulation of Pipeline Network,TQ056
  18. TD-SCDMA wireless network planning and optimization technology research,TN929.533
  19. Random multi- criteria group decision making method based on Bayesian theory,C934
  20. Human-Machine Interface Design of Control Panel for NC Machine Tools,TG659

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile