Dissertation > Excellent graduate degree dissertation topics show

Design of Measurement and Control System for Grinding Wheel Dynamic Balance Based on DSP

Author: ZhangZhiLi
Tutor: HanShunJie
School: Changchun University of
Course: Power Electronics and Power Drives
Keywords: Dynamic balance wavelet analysis Time optimal control Balance compensation Measurement and Control System
CLC: TP273.5
Type: Master's thesis
Year: 2011
Downloads: 12
Quote: 0
Read: Download Dissertation


In the grinder, grinding wheel imbalance will not only cause the vibration and noise, serious impact on the improvement of quality and precision grinding, but also speed up the spindle and bearing wear, seriously affecting the grinding life. In precision CNC machining process, the increasing demand for dynamic balancing of precision to resolve the issue.The article first analyzes the wheel mechanism and the resulting unbalance causes unbalanced signal to obtain the general characteristics of wavelet bases for the wavelet analysis will lay the foundation. Then the method by computer simulation analysis conducted on-site sampling data wavelet analysis, the extraction well reconstructed the unbalance vibration signals. In this paper, head of the internal structure and principle of balance based on the analysis, the establishment of a balancing head of the mathematical model. On this basis, the introduction of the time optimal control algorithm to the wheel balancing control system. The simulation results show:that the algorithm effectively reduces the settling time and overshoot, improved control efficiency and accuracy. Based on the extensive understanding and learn from the advanced technology based on the design of a new type of wheel balancing control system. The system as a core control chip TMS320LF2407 processor, with the magnetic-electric sensors to detect wheel rotation speed of the imbalance vibration to the wheel speed optical sensor as the reference signal, with DB10 wavelet wavelet analysis to extract the vibration signal reconstruction, using the time optimal control algorithm for high-speed rotation of the wheel balance control within the first two-motor, driven double eccentric gear ring to change the center of gravity to achieve balance between the amount of unbalance vibration compensation.The system is modular and structured approach to design hardware and software, and ultimately form a complete wheel balancing control system, and to complete the bench in the cylindrical grinder. Experimental results show that the system can extract a good signal imbalance, and can significantly reduce the vibration caused by unbalanced wheels, balance time to reach the intended target.

Related Dissertations

  1. Research on Testing and Analyzing Technology for Time Parameter of Aerospace Relay,TM58
  2. Study of Event Related Potentials Based on Chinese Auditory Cognition,R318.0
  3. Research Implementation of Crack Detection Method Based on Its Acoustic Property,TP274
  4. The Study of Palmprint Image Identification Based on Wavelet Analysis,TP391.41
  5. Study of GPS Data De-noising Method Based on Wavelet and Kalman Filtering,P228.4
  6. On-line Monitoring of Tool Wear for Mass Production,TG71
  7. Sound signal analysis method overloaded freight train rolling bearing fault diagnosis,TH165.3
  8. Reliability and Validity of Data Obtained from Normal Adults by Dynamic Balance System,R87
  9. HVDC transmission system fault diagnosis method,TM721.1
  10. Study on the Fault Diagnosis of Asynchronous Induction Motor Base on the Wavelet Analysis,TH165.3
  11. Fault Diagnosing of Rotating Machine Based on Vibration Signal Processing,TH165.3
  12. Study on Spatial Variability of the Field Soil Hydraulic and Saline Properties,S152
  13. Research on the Inspection and the Application of GPS Kenimatic Surveying Technology in the Project of FAST,P228.4
  14. The Application of Multivariate Analysis and Excitation-Emission Matrix Fluorescence Spectroscopy of Dissolved Organic Matter in the Identification of Red Tide Algae,X55
  15. DSP FPGA -based near-infrared detector key technology research,TN791
  16. Research on Control of Precision Centrifuge Dynamic Balance System,TH113.25
  17. The Detection Algorithm of Marine Oil Spill Based on Time Series Using MODIS,X834
  18. Studies on Wavelet Characteristics of Runoff in the Middle and Lower Reaches of Jinsha River,P333.1
  19. ECG Automatic Analysis Based on Wavelet Transforms,TN911.6
  20. Infrared Target Recogniztion Based on Optical Correlation,TP391.41
  21. Curvelet Transform Based on the Image Enhancement Algorithms,TP391.41

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile