Dissertation > Excellent graduate degree dissertation topics show

Research on the Theories and Simulation of Excavation Track Control for Electric Excavator

Author: MaShunLi
Tutor: ZhaoChunYu
School: Northeastern University
Course: Mechanical and Electronic Engineering
Keywords: electric excavator controlled synchronization frequency control PID control computer simulation
CLC: TU621
Type: Master's thesis
Year: 2009
Downloads: 83
Quote: 0
Read: Download Dissertation

Abstract


In this paper, we make researches on the automation and intelligentizing of the electric excavator’s(WS—005) digging process, in order to research system’s controlled synchronization method. In multi-drive system, because of complex of the mechanical structure, the factors that affect the system are much more. If the synchronization of different motors drive is assured, the right control strategy is chosen, to overcome a variety of system disturbances and impact, and make the system to drive with synchronization index. The aim of this paper is making two motors to achieve synchronous operation, and making an excavator to work in the best operating conditions through the frequency control technology of asynchronous motor and the use of digital PID to control the two motors. The excavator control system test-bed is built for future experimental research to lay a solid foundation through the study of the subject. The issue has important practical value and engineering significance, and this article contains the following aspects:(1) The mathematical model of asynchronous motor, whose transducer is under power supply condition, is established and the small parameter perturbation equation in neighborhood of the given point is inferred by using the voltage synchronization coordinate system. The asynchronous motor is controlled with frequency conversion and the numerical simulation is processed.(2) The trajectory planning process of excavation is got, according to operating characteristics of mechanical engineering. The dynamic model of excavator is established, according to the establishment of the robot model and analysis of the structure of an excavator and movement.(3) The mathematical model of asynchronous motor’s local little perturbation parameter and the transfer function of the local little perturbation parameter are inferred by using coupling dynamics theorem and adopting dynamics analyzed methods of the local little perturbation parameter.(4) The stability condition of controlled synchronization is inferred and the digital PID controller is designed by using Routh-Hurwitz theorem. The system simulation of digital PID control is processed and simulation results are analyzed.(5) The system of excavator intelligent trajectory control consists of hardware part and software part. The hardware part contains mainly two parts:control and inspection. The software part based on Delphi platform includes hardware monitoring, control and optimization.

Related Dissertations

  1. Research on Ducted Fan Unmanned Vehicle Autonomous Modeling and Control Strategies,V249.122
  2. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  3. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  4. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  5. Research on Solenoid Valve Test System for Water Medium,TH134
  6. Application of Servo System in Tension Control of Unwinder Machine,TP273
  7. The Research on Hydraulic System of Two-roll Straightening Machine,TG333.23
  8. Actuating Performance Investigation and Application System Development of IPMC,TB34
  9. The Research of Fuzzy Adaptive Soft Start Control on AC Asynchronous Motor,TM343
  10. Application of PID Control in Networked Control System,TP273
  11. Research on Hydraulic Synchronization Control of Four-cylinder Systems for Sector Section of Continuous Casting,TF341.6
  12. The Study on the Process Control and Its Algorithm of the Automatic Coal Blending of Coal Washery Loading System,TP273
  13. Wheel Crack Detection Platform Control System Design and Research,U467.4
  14. A Study of AGC System with Wind Power Intergration,TM76
  15. Control System Study on Public Performances Platform,TP273
  16. Investigation of Wound-Rotor Brushless Doubly-Fed Frequency Control System,TM921.51
  17. Ballistic missile target in a Gliding Range Design and Control System,TJ06
  18. 600MW units circulating pump VFD systems engineering applications and Effect Analysis,TM921.51
  19. Heat Exchange Station Control System Design,TP273
  20. Keep track of the inner formation control method,V448.2
  21. Research on the Electric Drive Control System of Cutter Suction Dredger Based on Frequency Control Technology,U665

CLC: > Industrial Technology > Building Science > Construction machinery and equipment > Earthwork machinery, mining machinery > Excavator
© 2012 www.DissertationTopic.Net  Mobile