Dissertation > Excellent graduate degree dissertation topics show

Research on the Key Technology of the Winding and Equipment for 3D Electric Inductions Coil

Author: ShenZuoZuo
Tutor: ChenWenHuaï¼›RenZuo
School: Zhejiang University of Technology
Course: Mechanical Design and Theory
Keywords: PLC Motion controller 3D electric inductions coil Velocity blending algorithm
CLC: TM55
Type: Master's thesis
Year: 2011
Downloads: 43
Quote: 0
Read: Download Dissertation

Abstract


Cooperated with OZMA, the control system of the equipment for production of 3D electric inductions coil is researched and supported by the National Torch Plans(2008GH040905). Velocity blending algorithm for axes moving acceleration and deceleration is firstly researched for winding tooling moving back and forth smoothly. Then the technology for winding of the 3D electric induction coil is developed and confirmed. And the connection circuit between the servo amplifier and motion controller is designed. Based on the technology of winding and hardware design, the control program in PLC and motion controller is programmed. The communication between PC and PLC is established by human-computer interface. At last, the whole system is testing and adjusted. Production for 3D electric induction coil winding is accomplished.In the first, the key technologies for 3D electric induction coil winding are researched. Based on the key technologies for the winding of 3D electric induction coil and analyzing the harmful vibration due to winding tooling moving back and forth in high speed, a novel velocity blending algorithm is proposed. The algorithm can makes the winding tooling moving smoothly and improves the precision of winding efficiently.Secondly, the mechanical component of the equipment is introduced. Based on the technology, the flow chart of winding is developed and determined. According to the requirement of the control, the overall structure of control system is constructed. And the controller and servo system are selected. At last, the circuit connections of whole equipment are designed and installed.Thirdly, Based on the hardware circuit of control system and the technology, the program of PLC and motion controller is developed and debugged.On-line testing of the equipment shows can makes the winding tooling moving smoothly and improves the precision of winding efficiently. And the hardware circuit is reliable and the program is stable.

Related Dissertations

  1. The Development of Electric Control System for Product Line of Cross-Linked Cable,TP273.5
  2. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  3. Equipment Research of the Ship Sewage Treatment,X703
  4. The Roles of Phospholipase C and D in Xylanase-Induced Defense Responses in Suspension-Cultured Rice Cells,S511
  5. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  6. Gantry planer simulation equipment design,TG551.2
  7. The Design of Monitoring System and Experimental Study of the Solar Assisted Heat Pump Unit with Cooling, Heating and Gaining Hot Water,TK511.2
  8. The Design of Automatic Control System of Experimental Stereo Garage,U491.71
  9. The Study of the Monitoring System of the Hydraulic Disc Brake,TD534.6
  10. The Design and Implementation of the Automation Management System of Yongchangjing River,TP315
  11. The Optimization Design and Research to Wet Coal Dryer Mechinery Control System,TP273
  12. Research on Electronic Control System of Mine-used Hydraulic Support,TD355.4
  13. Research on Coal Centralized Selection Control System of Hebi Sixth Factory,TD94
  14. Research and application of blast furnace gas -fired steam turbine blowers,TF321.8
  15. Research on the Fan Set Control System of Winter Cold-Resistant in the Shang Qing Mine,TD635
  16. Research and Design of Wind-PV Hybrid Generating in Sewage Treatment Plant,X505
  17. Development of LED Street Light Remote Control System Based on Power Line Carrier Technology,TP277
  18. Research and Optimization of the Control System of COG (Chip on Glass) Equipment,TP273
  19. Suitable for renewable energy access mobile emergency power control system design,TM46
  20. A Single Based on SCADA of the Grinding and the Classification Control System,TD928.9
  21. Power Plant Auxiliary System DCS Center Connection Network Control,TM621.6

CLC: > Industrial Technology > Electrotechnical > Electrical > Inductors, Coils,Chokes
© 2012 www.DissertationTopic.Net  Mobile