Dissertation > Excellent graduate degree dissertation topics show

Preparation and Electrochemical Performance Characterization of Olivine-Type Cathode Material of Lithium Ion Battery

Author: ZhaoDan
Tutor: XiaYongYao
School: Zhejiang Normal University
Course: Physical and chemical
Keywords: Lithium ion batteries lithium iron phosphate lithium manganesephosphate cathode materials carbon coating
CLC: O646
Type: Master's thesis
Year: 2013
Downloads: 57
Quote: 0
Read: Download Dissertation

Abstract


Compared with the traditional secondary batteries, lithium ion battery shows greater advantages at the aspects of energy density, rate capability and charge-discharge performance.Moreover, lithium ion batterys also have the advantages of low self-discharge rate, long cycle-life and eco-friendliness. Recently, lithium ion batterys have been widely used in all aspects of our life.Commercial LiCoO2is the best choice of the cathode materials due to its perfect capability, however, it meets the obstacles on the developmental way of lithium ion battery, especially for electric vehicle applications because of its high cost and toxicity. LiFePO4has the advantages of abundant raw material, high capacity, nontoicity, high safety and the excellent abuse tolerance. So it has been investigated intensively as attractive cathode materials for rechargeable lithium batteries. LiMnP04is another promising cathode material for lithium-ion batteries because of its higher redox voltage of4.2V versus Li/Li+. However, both materials show poor rate capability. Recently, many efforts have been made to further improve the power performance of LiFePO4through low-temperature route to obtain tailored particles and carbon supporting to improve the conductivity of solid phase. Various kinds of carbon materials have been suggested as conductivity supporters (or additives) for LiFePO4, However, up to date, the comparative investigation about the effect of carbon supporters on the electrochemical performance is still rarely reported. In the present work, we expiore various synthesis process using different carbon sources to improve its electrochemical performance. The main contents of this thesis are shown as follows:1. Acetylene black, carbon nanotube and graphene were employed as carbon supporter to prepare LiFePO4/acetylene black composite, LiFePO4/carbon nanotube composite and LiFePO4/grapheme composite by a facile solvothermal route followed by heat treatment.The LiFePO4/grapheme shows the best electrochemical performance.2. A spherical LiFePO/C composite was prepared from the spherical FePO4in reaction with lithium salts with carbon black or glucose as carbon source for synthesis. It was found that LiFePO4/C shows good electrochemical performance with carbon content of10%.3. The pure phase lithium manganese phosphate was prepared by different synthesis methods, including solvothermal route and chemical precipitation method. Finally, a Ni doped LiMn1-x NixPO4was prepared by a solid state reaction process. The Ni-doped Materials exhibits good charge/discharge performance.

Related Dissertations

  1. First-Principles Studies of Blacl Phosphorus and LiMn2O4 as Electrode Material for Lithium Ion Batteries,TM912
  2. First-Principles Studies of Cathode Material LiMO2 （M=Co, Ni, Mn） of Lithium Ion Batteries,TM912
  3. Hydrothermal Synthesis of LiNi0.9Co0.1O2 and LiNi1/3Co1/3Mn1/3O2 for Lithium Ion Batteries,TM912
  4. Low Temperature Performance of Lithium-ion Batteries That Used LiFePO4 as Cathode Material,TM912
  5. A Kind of Lithium-ion Battery Charge and Discharge Management Research,TM912
  6. Supercritical Method Preparation for Lithium Iron Phosphate Nanometer Material and Its Carbon-coating Research,TM912
  7. Research on Functional Electrolytes for Lithium Ion Battery,TM912
  8. Synthesis and Modification of Nano LiFePO4 as Cathode Materials,TM912
  9. Graphene and other substrates SnO Arrays growth , performance and Devices,TB383.1
  10. Nano-li4Ti5O12 Synthesized by Sol-Gel Method and Study on Its Modification by Carbon-Coating,TM912
  11. Synthesis and Modification of LiNi（1/3） Co1/3 Mn1/3 O2 Cathode Material for Lithium Ion Batteries,TM912
  12. Preparation of iron oxides , modification and application in the field of new energy,TQ138.11
  13. Lithium- ion battery cathode material Li 3 V 2 (PO 4 ) 3 Preparation and electrochemical properties,TM912
  14. Study on Electrolyte Additives of Li-ion Batteries and Solid Electrolytes,TM912
  15. Lithium- ion battery cathode material LiNi 0.5 Mn 0.5 O 2 Preparation and Electrochemical Performance,TM912
  16. Power lithium -ion batteries LiFePO 4 Discussion Preparation,TM912
  17. Research on the Equalization Charge Technology for Li-ion Battery Series in EV Application,TM912
  18. Research on Lithium Iron Phosphate Battery Fast Charging System,TM912
  19. Study on the Synthesis and Electrochemical Performances of LiFePO4/C,TM912
  20. SOC Estimation Algorithm of Lithium Batteries for Electric Vehicle and Research of Uniformity of Battery Strings.,TM912
  21. First-Principles Studies of Cathode Material LiMPO4 （M=Mn, Fe） of Lithium Ion Batteries,TM912

CLC: > Mathematical sciences and chemical > Chemistry > Physical Chemistry ( theoretical chemistry ),chemical physics > Electrochemical,electrolytic,magnetic,chemical
© 2012 www.DissertationTopic.Net  Mobile