Dissertation > Excellent graduate degree dissertation topics show

Hydration Characteristics of Self-repairing Coarse Particle Clinker and Effects on Cement Strength

Author: ChenXiao
Tutor: GeYong
School: Harbin Institute of Technology
Course: Traffic and Transportation Engineering
Keywords: clinker coarse particle fineness strength hydration degree
CLC: TQ172.1
Type: Master's thesis
Year: 2012
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


Cement fineness has been a focus recently. Problems of superfine cement havebeen widely known: for example, exothermic centralization in early stage, lack ofincrease of strength in late stage and decrease of durability, etc. Thus, research onstrength of coarse-particle cement in the long run can help to build theoretical basisto improve cement durability and to fulfill cement self-repairing.Existence of coarse particles can decrease the amount of water necessary tokeep cement in standard consistency. Increases of both percentage and size ofcoarse particles contribute to the decrease. However, the effect is not as obvious asestimated. When the size of coarse particles is less than30μm, no change of wateruse has been observed. As to time of condensation, no obvious effect exists becauseof coarse particles.As to hydration, with enough water, coarse particles can be sufficientlyhydrated up to50percent degree of cement. As size of particles increases, degree ofhydration will go down. For low heat cement, the overall degree of hydration islower than that of the ordinary Portland cement clinker, but with better growth trendin later stage.Moreover, this article studies surface hydration process of coarse particles.From the precipitation of Ca(OH)2, the formation of gel network, to the gap filling,the higher hydration activity of coarse particles is a premise to fulfill cementself-repairing.This article also studies3kinds of coarse clinker with different particle sizesand discusses their mineral components and particle degree distribution. Further,this article also studies the effects of particle size, with different contents, oncompressive strength, hydration characteristics and early condensation performance.Experiment results show that as percentage of coarse clinker increases, strengthfirst decreases and then increases. Where particle size falls within80μm150μm,strength loss is significant and no obvious activity can be observed in late stage;where particle size falls within60μm80μm, activity exists but not in an obviousway.

Related Dissertations

  1. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Experimental Study of Porous Composite Materials on the Base of Recycled Concrete Powder-Cement,TU528
  4. The Experimental Research on Regeneration Aggregate and Proportioning of Recycled Concrete Brick,TU528
  5. Effect of Micro Component on the Performance of Cement Clinker be Produced by Phosphogypsum,TQ177.3
  6. The Research on the Formation and Application of Carbonaceous Mesophase,TQ127.1
  7. Recycled aggregate semi- rigid concrete preparation and molding of test,TU528
  8. Study on Preparing the High Performance Fiber and Nonaporous Fiber by High Viscosity Nylon-6,TQ342
  9. The Influence of the Core Strength Training on the Balance of the Junior Wushu Athletes,G852
  10. Relationship between Marbling Scores of Pork and Sensory Attributes and Processing Functionalities,TS251.1
  11. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  12. The Research on the Physiological Mechanism of the Subtending Leaf Nitrogen Concentration Impacting the Strength Formation in Cotton (Gossypium Hirsutum L.) Fiber,S562
  13. Study on Time Synchronization Method for Urban Lighting Management System,TM923
  14. A Biocompatibility Study of the Ultrapro Mesh,R656.2
  15. Different Bottom Structure of Dental Brackets Affect the Adhesiveness-Three Dimensional Finite-element Analysis,R783.5
  16. Enterovirus Type 71 was purified by chromatography,R373
  17. Sclerosing dentin interface morphology observation and Bonding Strength,R783.5
  18. Preparation of tricalcium silicate and silicon physicochemical properties of calcium phosphate cement,R318.08
  19. High-rise building under the jointed rock slope stability studies,TU457
  20. Study on Mechanical Property of Plug-pin Steel Tube Scaffold Platform,U673.3
  21. Effect of Different Resin Cements and Silane Coupling Agents on Bond Strength of Glass Fiber Post to Root Dentin,R783

CLC: > Industrial Technology > Chemical Industry > Silicate > Cement Industry > Basic theory
© 2012 www.DissertationTopic.Net  Mobile