Dissertation > Excellent graduate degree dissertation topics show

Fault Diagnosis and State Evaluation of CTA Hydrogenation Process

Author: LiBo
Tutor: ZhongWeiMin
School: East China University of Science and Technology
Course: Control Science and Engineering
Keywords: CTA hydrogenation process Kernel Principal Component Analysis Faultdiagnosis SPC control chart State evaluation
CLC: TQ245.12
Type: Master's thesis
Year: 2014
Downloads: 13
Quote: 0
Read: Download Dissertation

Abstract


Pure Terephthalic Acid(PTA) is an important chemical raw material. PTA production process is mainly divided into two parts. First Crude Terephthalic acid(CTA) is produced by liquid phase catalytic oxidation reaction using P-xylene(PX). Then PTA is obtained by CTA hydrogenation process. In CTA hydrogenation process CTA is dissolved in the deionized water by increasing the heat and the pressure. Then catalytic reaction with hydrogen in the fixed bed reactor which is full of Pd/C catalyst is occurred. The main impurity4-carboxybenzaldehyde (4-CBA) will be removed after the above reaction. At the same time, non-ferrous material will be deoxidized. At last, fiber grade PTA through crystallization, separation and dry units is got.CTA hydrogenation process is a complex industrial system which has strong nonlinearity, uncertainty, large pure delay and strong coupling characteristics. The safe and stable operation not only influences the product quality, but also affects the consumption of raw materials, energy and other technical and economic indexes. So CTA hydrogenation process fault diagnosis and operating state evaluation research has very important significance. In this paper, the main work is as follows:(1) This paper establishes the normal statistical monitoring model by using the Kernel Principal Component Analysis (KPCA) with the historical data which represent the normal operates condition first. But the outliers in data sets will destroy the covariance structure of KPCA. It will make the model cannot truly reflect the real normal condition. So in this paper a method which combining outlier detection algorithm eliminates and KPCA algorithm is put forward. It eliminates the effects of outliers on the statistical monitoring model. At last CTA hydrogenation process fault is diagnosed using the squared prediction error(SPE) and Hotelling T2.(2) Least Squares Support Vector Machine (LSSVM) algorithm is applied to fault identification of CTA hydrogenation process. Because the parameters have large influence on LSSVM’s performance. In this paper, combined with the advantages of the Particle Swarm Optimization (PSO) and Genetic Algorithm (GA), a hybrid Genetic Partial Swarm(GAPSO) is put forward to optimize the parameters of LSSVM. Since it is often difficult to collect the abundant fault data in the factory, ASPEN PLUS based CTA hydrofining process model is used to generate the needed data. The simulation results show that the method of fault identification precision has better performance when it is applied to the CTA hydrogenation process.(3) In order to guarantee the CTA hydrogenation process to stay pin the good operating state.This paper uses the charts quality control (SPC) and process capability index to analysis the important production index of CTA hydrogenation process. Finally the operating state of the whole production process is evaluated and marked by the excellent, the normal and the bad conditions. Thus it can improve the production quality and reduce the consumption of material and energy though maintaining excellent operating condition, improving the normal operating state and adjusting the bad operating condition.

Related Dissertations

  1. Study on Decentralized Fault Diagnosis Based on Multiblock Kernel Methods,TH165.3
  2. The Research and Application of the State Evaluation Method of Power Generation Equipment,TM621.3
  3. Fault Diagnosis on Tennessee-Eastman Process,TQ021.8
  4. Study on the Straddle-type Monorail Cast Steel Pedestal Health Status Detection Based on Vibration Test Technology,U232
  5. The Prediction Research of Furnace Status As to Tendency to Tcold and Hot Based on Support Vector Machine,TF57
  6. An Application Research on Industrial Process Fault Diagnosis Method Based on KPCA and SVM,TH165.3
  7. Research on Process Quality Control System Based on WEB,TH186
  8. Research on Cognitive Network State Evaluation,TP393.0
  9. Feature Extraction and Pattern Classification Methods Study Based on Electronic Nose,TP181
  10. PCA - based dynamic facial feature extraction and its incremental learning algorithm,TP391.41
  11. Application of Sparse Linear Discriminant Analysis on Text Classification,TP391.1
  12. Face Recognition Research under Complex Background,TP391.41
  13. Based on S3C2440 Embedded Linux System Research and Application,TP316.81
  14. Evaluation for Large Grounding Grid of 500kV Substation,TM862
  15. Face Recognition Study Based on Kernel Principal Component Analysis and Support Vector Machine,TP391.41
  16. Volterra Series Identification Method Based on Quantum Particle Swarm Optimization and Its Application in Fault Diagnosis,TH165.3
  17. Pattern Recognition Based on Discriminative Common Vectors,TP391.41
  18. Two New Methods of Face Recognition,TP391.41
  19. A Weighted Kernel PCA and the Related Parameters Choice,TP391.41
  20. Study and Application of Quality Control System in Manufacturing Process,F273.2
  21. Research on Algorithm of 2D Face Recognition,TP391.41

CLC: > Industrial Technology > Chemical Industry > Basic Organic Chemistry Industry > The production of aromatic compounds > Aromatic carboxylic acids and their derivatives > Aromatic acid > Benzene series acid
© 2012 www.DissertationTopic.Net  Mobile