Dissertation > Excellent graduate degree dissertation topics show

Research of the Mechanical Performance of Glass Fiber Reinforced Aluminium Laminates with a Hole

Author: ZhaoLi
Tutor: QuGuiMin
School: Harbin University of Science and Technology
Course: Materials Physics and Chemistry
Keywords: GLARE laminates mechanical performance fracture strength finiteelement method numerical simulation
CLC: TB333
Type: Master's thesis
Year: 2013
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


Glass reinforced aluminum laminates is composed of glass fiber reinforcedcomposite material and high strength aluminum alloy sheet to make laminationboard for alternating overlaid by using the glued technology and then solidifiedunder certain pressure and temperature. GLARE has the benefits of lighter andfatigue resistance in contrast with aluminum one-layer plate. Laminates havemore properties such as: easier machining, cutting, and better impact resistancein contrast with single plate of glass fiber composites. For the purpose of ourinspection dismounting and maintenance, we used to add some holes in GLARElaminates, which would have some influences on mechanical performance. Atpresent, we have achieved many research achievement at home and abroad butthe content of the research is not comprehensive especially rare on mechanicalperformance reference for GLARE with holes.In this paper, the mechanical performance of GLARE laminates with holesare tested through experimental method under the action of tensile load and areanalyzed and researched, experiment results of GLARE laminates with differentaperture show that: different aperture lead to different time for rupture and thesmaller the aperture is, the shorter the break time and the stronger the stressintensity of laminates is; The relationship of stress-strain curve for GLARElaminates with holes under the action of uniaxial tensile load is about the doublelinear; With the increasing of aperture, the fracture strength of the laminates issignificantly declining and the declining way presents nonlinear regularity.A finite element model is established based on the ANSYS software andgradually failure analysis method is applied. A finite element numericalsimulation analysis of GLARE laminates with holes is carried on under the sameexperimental conditions and the results are compared with simulation results and the two is in good agreement with each other, which demonstrates the accuracyof finite element model.On the basis that mentioned above, the analysis method of numericalsimulation is applied and the mechanical performance of the GLARE laminateswith holes under different layer mode are predicted and then the change law ofstress-strain curve is obtained. Different features are presented for laminates withlayer mode [AL//AL//AL] around45o, for laminates with layer mode[AL//AL//AL] when is45o, the stiffness of laminates decreased fastestafter metal aluminum layer enters the yield stage while the stiffness of laminatesdecreased slowest when is0oand the greater the angle of fiber laying is, thefaster the stiffness of laminates is falling and the fracture strength declines.

Related Dissertations

  1. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  2. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  3. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  4. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  5. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  6. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  7. Research on Dust-Isolation Technology with High Pressure Air Curtain for Mechanized Tunneling Face,TD714.4
  8. Multilayer coextrusion drooling forming process temperature control technology,TQ320.721
  9. Fault combinations on water inrush and Its Prevention Research,TD745
  10. Coal and gas outburst Hou Wasi Dynamic Emission Law,TD713
  11. Gas and coal dust explosion characteristics of coexistence and Communication Research,TD712
  12. Wind turbulence characteristics of the bulk particulate matter pollution impact study wind erosion,X513
  13. Stress distribution law FLAC 3D simulation study,TU452
  14. Coal mining impacts on groundwater numerical simulation,TD741
  15. Dai Shun Mine Collapse Column 4325 track characteristics and control technology research and development,TD745
  16. Study on Non-Continuous Disintegrate in Surroundding Rock of Deep Roadway,TD325
  17. Separation technology research cluster projectile muzzle,TJ413.2
  18. Small-caliber ammunition broken pomegranate multifunction terminal effect influencing factors,TJ410
  19. Study on the Settlement Law of Ground Surface Due to Shield Construction of Shenzhen Metro No.1 Line,U455.43
  20. Study on the Size of Strip Coal Pillar under the Dense Buildings and Above the High Confined Water,TD823.6
  21. The Exploration of Ultra-High Water Floeing Fractured Zone in Shendong Mining Area,TD745.21

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Metal - non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile