Dissertation > Excellent graduate degree dissertation topics show

Experimental Research on Fatigue Failure of Connecting Nodes with High-strength Bolts

Author: MuJian
Tutor: ZhouZhiXiang
School: Chongqing Jiaotong University
Course: Bridge and Tunnel Engineering
Keywords: High strength bolt connection joint fatigue failure model test looseness
CLC: TU391
Type: Master's thesis
Year: 2010
Downloads: 139
Quote: 0
Read: Download Dissertation

Abstract


Basing on the background engineering of the world’s largest long-span steel truss arch bridge—Chongqing Chaotianmen Yangtze River Bridge engineering, the fatigue property of high strength bolt connection at cross joint of horizontal and transverse direction of light rail in the lower deck is focused on in this paper. The following studies are involved.The comparative analysis on calculation method of bridge load spectrum is completed in accordance with home and abroad specifications. According to Miner linear cumulative damage rule, the equivalent amplitude of internal force is determined. By ignoring the minor factors, the fatigue property of high strength bolt connection at the cross joint is taken into account and the simplification design for half-scale model is carried out.Two million times of fatigue tests under designing amplitude of loading for cross joint have been completed. The theoretic analysis and fatigue tests have both verified the reliability of this type of cross joint working under service loading. The subsequent tests are gradually increasing the designing amplitude of fatigue loading from 1.5 to 3.0 and observing the behavior of testing beam along with the increased amplitude of fatigue loading and repeat counts. The observations are composed of lateral wobble, filings at the surface of the connection, looseness of high strength bolts, and fatigue crack of welding at web and lower flange.Basing on the previous home and abroad studies, deep study on complete procedure of the looseness of one bolt has been finished. The influence of axial impact loading, lateral wobble, dynamic shearing loading of screw on the motion model and mechanic behavior of bolts have been analyzed. Formula of bolt looseness has been deduced by theory of kinematics and mechanic, and the failure criterion on the looseness of high strength bolt has also been discussed.In view of the model test, the force of transfer path in the model and the influence from the secondary internal force in the cross beam have been studied. It puts emphasis on the mechanism of looseness of high strength bolt at the joint by the force of pry. The calculation formula of the pry for T-joint has been deduced. The corresponding amplitude of fatigue loading to the looseness of joint bolt has been verified. And the complete procedure of failure for this type of high strength bolt has been generalized.

Related Dissertations

  1. Research on Mathematics Understanding of the 8~th Grade Students Based on the IRT,G633.6
  2. 1500 m water depth tension leg platform motion and mooring Numerical and Experimental Study,U661.7
  3. Box foundation on sand ground reaction force base Study,TU471.16
  4. The Design and Experiment Research of Electromechanical Servo,TJ765.3
  5. Dynamic model tests on tanks Platform,TE972
  6. Dynamic damage analysis of concrete gravity dam,TV642.3
  7. Stepped energy combined with auxiliary energy dissipator Experimental Research on Application,TV653
  8. Modern architecture bolted and welded steel welding stress and deformation of,TU391
  9. Shen pipe segment mooring ropes force state Study,U451
  10. Exploratory testing methods in the online game software testing application,TP311.53
  11. Research on Mechanical Behavior of Combined Sections Used in Steel-Reinfouced Concrete Pillar Base,U441
  12. Research on U-type Complementary Longitudinal Ventilation Mode of Highway Tunnel with Non-symmetric Wind Volume Demand,U453.5
  13. Model Test on Vehicle-Bridge Couped Vibration for the Long-span Bridge with High-pier,U441.3
  14. Railway embankment seismic subsidence shaking table model test,U213.11
  15. Model Test Study on the Interaction between Compound Lunar Soil and the Footpad,V416.8
  16. Study on Local Scour Around Spur Dikes on Sand Beds of Yellow River by Model Experiment,TV131.6
  17. Preparation of Soft Clay for Bearing Capacity of Model Tests and Study on Installation of Suction Caissons,TU43
  18. The Research on Physical Model Experiment of the Load-Unload Response Ratio Pattern and Its Failure Mechanism of Debris Landslide Induced by Rainfall,P642.22
  19. Crack Growth Research for Bead Coil of Heavy Duty Radial Tires and the Life Estimate,TQ336.1
  20. Micro-Experimental Studies and Theoretical Analysis on Permeability of Micro-Fine Cement,TQ172
  21. Numerical Simulation and Experimental Research on Hump District of Francis Pump-turbine,TK733.1

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Steel
© 2012 www.DissertationTopic.Net  Mobile