Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Point Load Strength, Uniaxial Compressive Strength and Tensile Strength for Common Rocks in Roof and Floor of Coal Seam

Author: WangLiang
Tutor: FuZhiLiang
School: Anhui University of Technology
Course: Mining engineering
Keywords: failure mechanism of point load point load strength uniaxial compressivestrength uniaxial tensile strength point load tester
CLC: TD32
Type: Master's thesis
Year: 2013
Downloads: 4
Quote: 0
Read: Download Dissertation

Abstract


This paper applied theoretical analysis, laboratory experiments and computer programming to investigate the relations between point load strength, uniaxial compressive strength and uniaxial tension strength.According to the theory of stress distribution in a semi-infinite body, the axial stress of point load test was analyzed. Then combined with the strength theory of rock failure, the fundamental causes of rocks failure under point loading were discussed. Rock sample surface contacts with indenters under the interaction of compressive stress and tensile stress, tensile strain reaches its limit, and then tensile failure forms firstly near the indenters. After undergoing partial failure, the stress concentration occurs rapidly, and is transferred to the deep part of rock sample by cracks, when the two cracks get across, rock sample will fail completely. Point load strength is the comprehensive reflection of uniaxial compressive strength and tension strength.Using self-designed point load tester and RMT-150B rock mechanics testing system to test point load strength, uniaxial compressive strength and tension strength of the six kinds of rocks common in coal seams. According to test results, the influence of indentation depth on point load strength was analyzed; a new calculation method without considering the indentation depth was put forward; the linear model and power function model were built.Empirical formulas for cylinder rock sample were fitted by Mathematica software and error analysis, a new program of conversion of point load strength into compressive and tensile strength was developed.The method of converting point load strength into uniaxial compressive strength and tension strength were verified. The rock mechanics parameters can be achieved faster, cheaper and accurately by the high accuracy method. Finally, it can provide important basis for rock mass classification of seams.

Related Dissertations

  1. Testing Method on Dynamic Fracture Toughness of Rock,O346.1
  2. Research on Inclined and Medium-Thickness Phosphate Ore Body’ Stope Strata Behaviors and the Overlying Strata’ Failure Law of Caving Method,TD32
  3. Study on Numerical Simulation of Mechanical Response and Creep Characteristic for Coal-Pillar in Thick Seam Mining,TD32
  4. Yunnan Province the Longling MENGXING lead-zinc roadway surrounding rock stability study,TD32
  5. The Stability Analysis and Safety Forecast of the Goaf in Mental Mine,TD32
  6. Yunnan Tin Mine remnant stoping loose ground pressure control study,TD32
  7. Sijiaying open-pit iron Optimization of the final slope angle,TD32
  8. Research on Abutment Pressure Distribution Law and Influencing Factor of the Surrounding Rock Based on Mechanical Properties Graded Features,TD32
  9. Study on Creep Regulation of the Rock of GaoJiaLiang Coal Mine,TD32
  10. Stability Analysis of Jamb for Liaoyang Gypsum Mine,TD32
  11. Ma Hang iron ore the goaf stability analysis and processing technology,TD32
  12. Gannan tungsten mine ground pressure evaluation method and ground pressure zone recovery research,TD32
  13. Liangshan iron ore mine goaf stability,TD32
  14. Study on Surrounding Rock Stability of Deep Mining Laneway,TD32
  15. The Gentle-dipping and Medium-thickness Phosphate Ore Body’ Undergroud Mining Stope Strata Behaviors and the Overlying Strata’ Failure Law,TD32
  16. Rock Stability Evaluation and Treatment Program in Coal Mine Area,TD32
  17. Study on Strata Behavior Regulavity by Top-caving Mining in Three Soft and Unstable Thick Deep Coal Seam,TD32
  18. Anlin coal caving face cannon Strata Behaviors and top coal caving Prediction,TD32
  19. Research of the Distribution Law of Mining Geostatic Pressure in Complicated Geological Conditions and It’s Controlling Methods,TD32
  20. Discrete Element Analysis on the Waterproof Pillar to Coal Seam Mining Goaf Beside Large Fault,TD32
  21. Research on Laws of Underground Pressure in Fully-mechanized Face of Nanliang Mine,TD32

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Rock pressure and rock movement
© 2012 www.DissertationTopic.Net  Mobile