Dissertation > Excellent graduate degree dissertation topics show

The Analysis of Discriminant Method of Ground Drilling Based on the Finite Element Strength Subtraction

Author: ShiJiaMing
Tutor: WangCheng
School: Chongqing Jiaotong University
Course: Bridge and Tunnel Engineering
Keywords: Ground drilling Limit analysis Factor of safety
CLC: TD712.6
Type: Master's thesis
Year: 2013
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


Ground gas extraction technology is an effective means rising in recent years togovernance mine gas overrun，but the Ground gas drainage recovery well have toexperience Severe deformation of the overburden of Coal seam，its load-bearing formis more complex。just because of this，the safety assessment of ground gas extractionwells have always been the problem that bothering people。This article apply the finiteelement strength subtraction which is widely used in geotechnical engineering in theground drilling safety assessment，the following several aspects of the research wasconducted of the ground drilling：(1)We learned that displacement and stress of the interface between layers areconcentrated through the numerical simulation of excavation process of coal seam。Especially that，the junction of the critical layer and the lower layer is the high-riskdamage position of the drilling。(2)Establish the three-dimensional model of the ground drilling casing indifferent diameter and different wall thickness，we get the distribution of the tensilestress and shear stress on the ground drilling casing cross section。And we get the rulethat the maximum tensile and shear stress of the ground drilling changing with thediameter and wall thickness。(3)Bring in finite element limit analysis thought，we have been obtainedrespectively tensile and shear safety factor of the ground drilling casing through thereduction of the casing tensile strength and shear strength。And we get the grounddrilling casing tensile and shear failure modes and failure process though the changeof casing plastic zone with reduction factor。(3)We get the tensile and shear safety factor of4308working face in a coalmine， Jincheng coal group，though the method of calculating safety factor bynumerical simulation。And the safety factor and strata displacement monitoring datawere compared, through the analysis of the comparison results proved that the safetyfactor used to evaluate the safety of ground drilling is feasible.

Related Dissertations

  1. Analysis on Slop Stability of Mountain Highway,U416.14
  2. Reliability Analysis of Waste Dam of Municipal Solid Waste Landfill,X705
  3. Stability Numerical Simulation of Cut Slope with Ecology Slope Protection,U417.1
  4. Three-dimensional convex slope stability analysis and numerical simulation studies,TU43
  5. The Calculation of Soil Nails Based on Sliding Sphenoid-mass Limit Analysis,TU476
  6. Two-way eight-lane small clear distance highway tunnel support reaction force cap analysis support parameter optimization study,U451
  7. Across two-way hollow plate structure finite element analysis,TU375.2
  8. Theoretical Analysis and Model Test of Bearing Capacity of Suction Caissons with Taut Wires in Soft Clay,TU43
  9. Experimental Study on the Performance of the Shear Capacity of Gate Slot,TV663
  10. Yield-Line Theory Application and Studying of the Plate in Plastic Limit State,TB125
  11. The Limit Analysis of Slope Engineering Stability,TU43
  12. The Mechanisms and Applications of Slope Reinforcement by Considering the Stiffness Effects of Anchors,TU472
  13. Research of Rockmass Mechanics Parameter on the Overlying Rock Subway of Qingdao,U451.2
  14. Get off the bridge crosswind aerodynamic coefficients numerical simulation and vehicle safety research,U461
  15. Nonlinear failure criterion shallow tunnel surrounding rock pressure limit analysis,U451.2
  16. Study on the upper Bound Limit Analysis in Stability of Slopes,TU43
  17. Plastic Limit Analysis of Cylindrical Shells Under Twin-shear Yield Criterion,TU333
  18. Ultimate Bearing Capacity Research on the Steel Tube Composite Column Filled with Steel Reinforced Concrete,TU398.9
  19. Stability Analysis of Slope by the Inverse Reliability Method,TU43
  20. Application of Limit Analysis Method to Slop Stability and Earth Pressure of Retaining Wall,TU43
  21. Carrying Capacity Finite Element Analysis of Piping Branch Junctions Based on Effect of Enhanced Plasticity,TB125

CLC: > Industrial Technology > Mining Engineering > Mine safety and labor protection > Mine atmosphere > Mine Gas > Gas Drainage
© 2012 www.DissertationTopic.Net  Mobile