Dissertation > Excellent graduate degree dissertation topics show

High Temperature Oxidation Behaviors of Ti2AlNb Alloy with Surface Plasma Aluminized Layer

Author: LiLong
Tutor: ZuoQiang
School: Nanjing University of Aeronautics and Astronautics
Course: Materials Processing Engineering
Keywords: Ti2AlNb alloy plasma aluminizing tribological behavior electro-chemical corrosion property high-temperature oxidation resistance
CLC: TG174.445
Type: Master's thesis
Year: 2013
Downloads: 8
Quote: 0
Read: Download Dissertation

Abstract


Ti2AlNb orthorhombic alloy have exhibited great potential as elevated temperature structuralmaterial for advanced aerospace due to its high-yield strength, fracture toughness and creep resistanceas well as its low notch sensitivity. It has an important significance for reducing the vehicle weight,improving the fuel efficiency and high temperature service performance. But the shortage of poorhigh temperature oxidation resistance restricted its actual uses. To solve these problems, this paperproposed to form the aluminizing modification layer on Ti2AlNb alloys by double glow plasmasurface metallurgy technique. The microstructure, chemical composition distribution and phaseconstituent of the layer was analyzed by SEM, EDS and XRD. The microhardness, tribologicalbehaviors, Corrosion behavior and high temperature oxidation behaviors of the layer wereinvestigated.The optimum process parameters of plasma aluminizing on Ti2AlNb alloy are listed as follows:source voltage:650V, cathode voltage:450V, distance between source electrode and work-piece:10mm, working pressure:40Pa, diffusing time:3h. The aluminized layer is compact andhomogeneous and combined well with the substrate. The aluminized layer is about10μm thick andconsisted of an outer aluminum rich layer and inner Al-diffusing layer, the compositions of the layerdistributes in gradients from the surface to the substrate. The microhardness of the layer is440.2HV0.1which is higher than the substrate’s. Ball-on-Disc rubbing tests show that the aluminized layerimproved the abrasion resistance of the substrate. Electrochemical tests show that the corrosionresistance of the layer and substrat are approximate. After oxidized at650℃,750℃,850℃for100hours, the oxidation films are compact and without flaws, and the aluminized layer gained lessoxidation mass. The substract’s oxidation products are TiO2, AlNbO4, and a little Al2O3. The oxidationfilms of aluminized layer are consisted of an outer Al2O3layer which may stop the diffusion ofoxygen and inner TiAl3which may improve the risistance to high temperature oxidation. EDS resultsshowed that the oxygen is only existed within1μm of the oxidation layer which proved that thealuminized layer effectively prevent the internal diffusion of oxygen. The results show that theimprovement of high temperature oxidation resistance of Ti2AlNb alloy is announced.

Related Dissertations

  1. Research on High Temperature Performance of Mould Materials with High Current Pulsed Electron Beam Alloying,TG174.4
  2. Research on the Scuffing Resistance of High-temperature Bolt by Chromizing Process,TG156.88
  3. Several oil-soluble metal Nanoparticles and Their Tribological Behavior,TB383.1
  4. Southwest Jiaotong University Master Degree Thesis,TG113.12
  5. A Study of Preparation and Properties of Nanocomposite Coatings,TQ153.1
  6. Study on Resistance to High Temperature of Nano-ZrO2 Ceramic Composite Coating,TB304
  7. Study on the Microstructure and Properties of C/C Composites Modified by In-situ Grown Nanofibers,TB332
  8. Preparation of Dispersible Copper、Copper Composite Nanoparticles and Investigation of Their Tirbology Behavior,TB383
  9. High Temperature Oxidation Resistant Coatings of W-Re Alloy Thermocouple,TG174.4
  10. Study on Mechanical and Tribological Properties of Glass Fiber-reinforced Polyamide6Composites Filled with Solid Lubricants,TB332
  11. The Research on Microstructure, Properties at High Temperature for Mg-Gd-Y-Zn Alloy,TG146.22
  12. The Preparation of High Temperature Oxidation-resistant Coating on TB2Alloys,TG174.44
  13. The Research on Microstructures and Performances of Cast Iron Surface Alloying Layer with EPC Casting-penetrating,TG249.6
  14. Study on the Process of Fe-Cr-W-Ti-Y2O3 Alloy Powders by Mechanical Alloying and the Performance of Sinter,TF124.5
  15. Synthesis of Niobium, Molybdenum, or Rhenium-containing SiC Precursors and Fibers,TQ343
  16. Research on Synthesis and Properties of AlN/Si3N4 Nanostructured Multilayers and Zr-Si-N Composite Films,TB383.1
  17. Cooling on Fe_3Al intermetallic microstructure and properties of,TG113
  18. Research Ion Nitriding and Ion Carbonizing on Ti6Al4V,TG174.4
  19. Research on Plasma Surface Cr-Si Alloying and the Tribological Behavior of Tial-based Alloy,TG174.4
  20. Research on Corrosion and High Temperature Oxidation Resistance of Mo and Mo-Cr Alloyed Layers on TC4 Prepared by Double Glow Plasma Surface Alloying,TG174.445

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology > Metal complex layer of protection > The surface alloying ( surface alloying )
© 2012 www.DissertationTopic.Net  Mobile