Dissertation > Excellent graduate degree dissertation topics show

Study of Characteristics of Flow Field in Multi-Cone Angel Convergence Gap Hydrostatic Pressure Seal

Author: MoLiGen
Tutor: CaiJiNing
School: Beijing University of Chemical Technology
Course: Fluid Machinery and Engineering
Keywords: hydrostatic pressure seal cone seal sealing performance
CLC: TB42
Type: Master's thesis
Year: 2010
Downloads: 49
Quote: 0
Read: Download Dissertation

Abstract


Mechanical Seal is an important part of engineering equipment, the radical convergence gap seal belongs to self-pressurized hydrostatic pressure seal. The fluid film has high carrying capacity because of its positive stiffness, which is often used in the dynamic sealing condition of higher operating parameters, such as the lower primary sealing assembly of the reactor coolant pump of the nuclear power plant. Although the convergence gap hydrostatic seal is used in many important occasions, the theoretical research of it is also lack, especially the effect which is needed for further research in the structural parameters on the sealing performance.According to the characteristics of convergence gap sealing, this paper presents the variable cone angle structure of convergence of gap hydrostatic pressure seal and the multi-angle model is divided into two groups to discuss.Then the models of multi-cone angle would be established. Using Fluent software, a three-dimensional numerical simulation of the pressure-velocity coupling was preformed for the liquid film of the multi-cone angel convergence seal gap and the sealing performance of different model parameters were calculated in the different working conditions, such as opening force and leakage. The effect of sealing structure parameters and operation parameters of multi-cone angle convergence gap hydrostatic pressure seal on sealing performance was analyzed, while identifying some changes in the general law of sealing performance, and two types of cone angle on the sealing performance of the model were compared.In a word, as the computational fluid dynamics, finite volume method to the theoretical basis,the paper deeply study multi-cone angle convergence gap hydrostatic pressure seal, and two types of convergence hydrostatic seal model gap parameters are calculated, such as opening force and leakage. We can get some conclusions and rules from the intuitive charts which were drawled by some software, and the results which had got were analyzed and contrasted. This dissertation offers theoretical support for the engineering design and application and a theoretical basis is made for the further study such as the optimization of seal structural and improvement of sealing performance.

Related Dissertations

  1. Design of a Multi-lip Vacuum Sucker,TB75
  2. Research on Key Technology of Experimental Prototype of New Underwater Flange Connecting Tool,TH131
  3. Study on Preparation and Properties of Anodic Films for AZ31 Magnesium Alloy,TG146.22
  4. The Research on Micro-gap Flow Field and Sealing Performance in the Sprial Grooved Gas Seals Based on CFD,TQ051
  5. Performance Parameters Calculation and Optimization Based on MATLAB in the Micro Porous Seals,TH136
  6. Characterization and Gas Sealing Performance Analysis of Three-Dimensional Rough Surfaces,TH134
  7. Performance Analysis and Software Development of a New Shallow-Slot Split Floating Ring Seal,TB42
  8. Study on a Kind of Conductive Silicone Rubber Having Wideband Electromagnetic Shielding Property,TQ333.93
  9. The Research on Sealing Performance of the Unloading Valve,TH138.52
  10. Study of the Performance of Mechanical Seals with Laser Textured Ring Face,TH136
  11. Numerical Analysis of Mechanical Seal with Cylindrical Micro-Pores on Surface,TH136
  12. Development and Research on a New Type High Pressure Half-self-energizing Gasket,TH136
  13. Research on Numerical Analysis and Optimization of Mechanical Sealing Performance,TB42
  14. Valve simulation test system performance evaluation method,TH134
  15. Preparation of High Barrier Material-Vinylidene Chloride Copolymer Latex and Its Application on Paper Based Packing Material,TQ637
  16. The Analysis and Simulation of Temperature Field and Stress Field in an Oil Slurry Heat Exchanger,TQ050.2
  17. Research on Design Method of Large-sized Double-cone Seal Structure,TB42
  18. Numerical Simulation and Optimum Geometric Parameters for Controllable Film Liquid Hydrostatic Pressure Seal,TB42
  19. Study on the Rotating Shaft Seal of Deep-Sea Motor,TH136
  20. The Research of the Principle of Heat Dissipation of Lip Seal,TB42
  21. Study of Pumping Effect of Rotary Lip Seal,TB42

CLC: > Industrial Technology > General industrial technology > Industrial common technology and equipment > Sealing technology
© 2012 www.DissertationTopic.Net  Mobile