Dissertation > Excellent graduate degree dissertation topics show

Study on heat mould continuous casting of single crystal copper rod device and process

Author: AnGuiHuan
Tutor: ZhaoHongJin
School: Jiangxi University of Technology
Course: Materials Processing Engineering
Keywords: single crystal continuous casting single crystal copper apparatus numericalsimulation process parameters
CLC: TG291
Type: Master's thesis
Year: 2013
Downloads: 35
Quote: 0
Read: Download Dissertation

Abstract


In recent years,numerous studies show that:single crystal copper wires with outstandingmechanical properties and conductivity have been attracted more and more attention by widelyused in the fields of electronic communication,network,audio and video device,national defenseand other fields,with a very broad application prospects.In this paper,a horizontal continuous directional solidification apparatus was preliminarilydesigned and manufactured on the basic principle of Ohno Continuous Castingtechnology(OCC),the influence of furnace structure with different inlets and outlets wasresearch by the numerical simulation.At the same time,the continuous casting model wasestablished,the influence of the continuous casting process parameters on solidification processof solid-liquid and surface quality was analysis by combining numerical simulation andexperiment,the reasonable process reference was obtained under the experimental conditions，and the evolution law of microstructure of single crystal was discussed.The main results and conclusions are as follows:(1) A set of horizontal OCC apparatus is self-designed and manufactured,which holds thecharacteristics of simple structure,reliable operation and meets the necessity.(2) The furnace body of OCC apparatus is analyzed by numerical simulation,the resultsshow that:it has a greater impact for casting solidification process stability by the inlet andoutlet structure,and the optimizing scheme6is proposed.(3) In the process of OCC,the position of solid-liquid interface is mainly affected by moldtemperature,casting speed,cooling distance.and were moved to casting export with theimprovement of mold temperature and casting speed or the reduce of cooling capacity.(4) The simulation and experimental results show that:in the experimental device,theprocess parameter selection range to obtain single crystal copper rods with smooth surfacequality is: the liquid level height is6-10mm,melt temperature is1373-1423K,mold temperatureis1363-1373K,casting speed is80-100mm/min,cooling distance is40-50mm,cooling water is800-900ml/min.(5) Based on the simulation results and field tests,the single crystal copper rods8mm indiameter with smooth surface quality have been successfully produced,and three growth stagesof equiaxed crystal,columnar crystal and single crystal have been verified,the mechanicalproperties and conductivity can meet the requirements of single crystal copper rods.

Related Dissertations

  1. Applied Research on Swim-relay Feedback Instrument in the Relay Start Training,G861.1
  2. Research and Improvement stove metal casting production systems,TG23
  3. Optimization Study on Gating System and Molding Process Parameters of Injection Mold Based on Simulation,TQ320.662
  4. The Design of Pressure Transmitter Based on C8051F Single Chip,TP368.12
  5. Theapplied Research on the Design of Injection Mold and the Molding Process of Long Fiber Reinforced Nylon 66,TQ320.662
  6. Optimization Study on Injection Product Warpage Based on ANN (Artificial Neural Network),TQ320.66
  7. The melt extrusion RP precision analysis and processing,TG376
  8. Substation equipment connector Temperature Management System Design and Development,TP311.52
  9. Warpageanalysis and Research of Mobile Phone Shell Injected Plastic Part with Thin-wall Metal-insert,TQ320.662
  10. Study on Hydrogenation and Characterization of Recycle Solvent for High Inertinite Shenhua Direct Coal Liquefaction,TQ529.1
  11. Research on Influence Factors of Tri-ethylamine Cold Box Core-making Process,TG242
  12. System Design of Battle Simulation Training Apparatus for a Certain Type of Equipment,E939
  13. Fixed Buckle Injection Mold CAD/CAE Technology Application Research,TQ320.66
  14. Research of Laser Moxibustion Instrument with Omnibearing and Multiple Path Function,R245
  15. Research on Mechanical Properties of 304 Stainless Steel by Selective Laser Melting,TN249
  16. Control object based on a variety of new chips and chip Experimental Equipment,TP368.12
  17. \,U468.2
  18. Mold cavity surface MRF technology research,TG580.692
  19. Investigation on Process, Microstructure and Performances of Microarc Oxidation Coating in Dual Electrolyte Fabricated on ZK60 Magnesium Alloy,TG174.453
  20. Study on Injection Molding Process Multiobjective Optimization and Quality Estimation Based on RBF Neural Network,TQ320.662
  21. Experimental, Study and Numerical Simulation for Oxy-Fuel Combustion Characteristic of Pulverized Coal-Fired Boiler,TK229.63

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Non-ferrous metal casting > Heavy metal casting
© 2012 www.DissertationTopic.Net  Mobile