Dissertation > Excellent graduate degree dissertation topics show

Finite Element Analysis and Springback Prediction of the Press Bending of L-section Steel Part

Author: ShiYang
Tutor: WangDaYong
School: Dalian Jiaotong University
Course: Materials Processing Engineering
Keywords: L-section steel press bending springback prediction finite element analysis(FEA) orthogonal test regression equation
CLC: TG306
Type: Master's thesis
Year: 2013
Downloads: 6
Quote: 0
Read: Download Dissertation

Abstract


Springback constraints the dimensional accuracy, die design, the cost and the production efficiency, and it was one of the hot spots and difficulties in metal and plastic processing research. Springback is a universal phenomenon in sheet metal forming process as well as profile. The front bracket of generator air duct was obtained by L-section steel press bending. The forming is difficult, and the springback is one of defects. This study is about finite element analysis and springback prediction of the press bending of L-section steel part., the FEM mode was established by using numerical simulation software DYNAFORM according to process parameters, and with the experimental data, model boundary conditions was corrected so as to prove the reliability of the simulation results, and the process was improved for the defects in simulation.Because empirical formula is about the plate, there are errors in calculating profile springback with empirical formula and the die design data of the press manual in the profile bending die designs. In the absence of accurate data to guide, make profile bending die design difficult, and increase costs of production. The springback formula of plate in the manual was amended based on test and FEA, and the relative bending radius coefficient C was introduced, and the plate thickness/was replaced with flange height H. The amended formula was better used in calculating the springback of equal angle steels.With designing orthogonal test scheme, the effect of each factor trend and degree on L-section springback was analyzed. Orthogonal test data was input to the software MATLAB with regression analysis to get the multivariate linear regression equation about the effect factors, and the equation was rearranged to a formula to predict the curvature radius of punch for L-section press bending: Where, Ro—Curvature radius of punch; R’—Curvature radius of workpiece; σ5—Material yield strength; k—Material hardening coefficient;—Width of web; H—Height of flange.It has a good reliability in the producing. To sum up, the result are useful in die design and producing,so as to decrease the times of trying dies, reduce the cost and improve the efficiency.

Related Dissertations

  1. Powered Activited Carbon-UF for Treating Micro-polluted Surface Water,X703
  2. Study on Extracting Process of Rhizoma Alismatis and Rhizoma Smilacis Glabrae and Their Hypouricemic Effects,R284
  3. Experimental Study on Extracting Humic Acid from Huolinhe Lignite,S141
  4. Long residual herbicide mesotrione degradation BACTERIA and Degradation Characteristics,X172
  5. Fixed Buckle Injection Mold CAD/CAE Technology Application Research,TQ320.66
  6. Optimization of Machining Parameters of the Mating Surfaces of the Large Power Low Stress and Experimental Research,TG61
  7. Improving the Light Leakage Phenomenon of LCD Panel by Using Taguchi Method,U463.6
  8. A Preliminary Study of Quantitative Cervical Vertebral Maturation Based on Computer Aided Cervical Vertebra Analysis,R783.5
  9. Sensor data compensation algorithm design and implementation,TP301.6
  10. A Study on Feeding Technological Parameters of Crankcase in Multidirectional Squeeze Casting,TG249.2
  11. Study on Main Controlling Factors and Prediction Models Base on GA-WNN of Mining Subsidence Coefficient,TD325
  12. The Apply of Foaming Agent on the Light-Weight Grouting Materials,TU528.042
  13. Experiment and Numerical Simulation for Thermal Properties of Gas Radiant Tube,TK174
  14. Study on Vibration and Noise of Deepwater Semi-submersible Drilling Unit,U674.381
  15. Research on Fast Repair and Regeneration Technology of Cement Concrete Pavement,U418.6
  16. Study on Organic Additives Applied to Electrodeposited Copper Foil,TF811
  17. Design and Simulation of Pressure Casting Process for Magnesium Steering Wheel,TG249.2
  18. Experimental Investigations on Growth of Plant Influenced by Iron Ore Tailing from Yunxi,TD926.4
  19. Preparation Organic Multi-Fertilizer Contain Silicon from Coal Gangue/Coal Ash and Crop Straw,TQ444
  20. Process Optimization for Injection-Compression Molding Based on CAE,TQ320.662
  21. Nonlinear Finite Element Analysis of RC Frames with Y-eccentrically Brace,TU398.9

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > General issues > Pressure processing
© 2012 www.DissertationTopic.Net  Mobile