Dissertation > Excellent graduate degree dissertation topics show

The Study of Fluid Simulation for Semi-solid Stirring Brazing Aluminium Matrix Composites

Author: ZengYouLiang
Tutor: YeHong
School: Chongqing University of Technology
Course: Materials Science
Keywords: aluminum matrix composite computer numerical simulation rotationstirring flow field of brazing filler metal welding process parameters
CLC: TG454
Type: Master's thesis
Year: 2013
Downloads: 21
Quote: 0
Read: Download Dissertation

Abstract


In this paper, the professional computer numerical simulation software is used tosimulate the processing of semi-solid stirring brazing in air. Two-dimensional numericalcalculation model is established, which the flow of filler metal is looked as viscous,laminar and incompressible Newtonian fluid. The stirring tool is looked as a rotating typeof entity, by setting velocity inlet boundary conditions to realize the effect of weldingplatform moving. This article mainly discusses the influence of four kinds of weldingparameters in flow field through the calculation model, which are welding temperature,welding speed, stirring rotation speed and stirring tool size respectively. At the same timethe actual welding experiment is implemented with the four kinds of welding parameters.Through computer numerical simulation to get the distribution of the flow field in the weldfiller metals, which predict and explain the actual situation, at the same time through theactual welding experiment to verify the result of the computer numerical simulation.Finally, based on the computer numerical simulation, an optimized semi-solid stirringbrazing aluminum matrix welding process is established.The weld interface of macro-micro morphology and mechanical properties of theweld joint can be explained basically by the computer numerical simulation model. At thesame time, the truth welding experiments can verify the results of computer numericalsimulation basically.The result of computer numerical simulation shows that the lower weldingtemperature, the more obvious effect on the substrate surface. If the temperature is too low,it will affect the forming of weld filler metals; The welding speed influence the distributionuniformity of force filed on the both sides of the interface but has less influence on the sizeof interface force field. The lower welding speed will make the more uniform distributionat both sides; Stirring rotation speed mainly influence the quantity of rotation force fieldand also the uniform distribution of force field at both sides of the interface. The higherstirring rotation speed, the greater force filed, and more uniform distribution at both sides;The size of stirring tool mainly influence the intensity of the effect of rotation force fieldmainly, the bigger it is, the greater force filed there is.By the model of computer numerical simulation, the reasonable welding parameterwill be obtained as follows: T=470℃,v=1.25mm/s, ω=5440rpm and D=1.9mm. Under the welding parameter, the good welding joint will be obtained, because the force fieldat the sides is higher and more uniform distribution. The number of shear stress can bereached101MPa by actual brazing experiment, slightly higher than the parent materials. Atthis time, not only good performance and slinky shape will be got, but also improve theoperability of welding and welding efficiency, etc.

Related Dissertations

  1. Study on Fiber Laser Welding of Aluminum Alloy with Filler Wire,TG456.7
  2. Study on Sharing Exhaust Dust System for High-rise Residential Building,TU834
  3. Structural Steel Hardenability Network Database System’s Establishment,TP311.13
  4. The Study of Cutting Chatter Recognition and Prior-Suppression Methodology,TG659
  5. External magnetic field quenching transient temperature field and phase-change computer numerical simulation,TG155.92
  6. Research on High Polymer Flow in Spinneret Microhole and Profiled Fibers Formation Process,TQ340.6
  7. Numerical Simulation on the Rheologic Behavior in the Polymer Oscillation Injection Molding Process,TQ311
  8. Preparation, organization and performance of sub-micron particle reinforced aluminum matrix composites,TB331
  9. The Studies of Mixed Traffic Flow with Cellular Automata Models,U491.112
  10. Study for Interfacial Design and Damping Mechanisms of Sn-Bi Coated Aluminum Borate Whisker Reinforced Aluminum Matrix Composite,TB331
  11. Computer numerical simulation study of strong electromagnetic fields on the ionosphere changes,P352
  12. Numerical Simulation Research on Linear Friction Welding of45Steel,TG453.9
  13. The Research on Welding Technology of Heavy Mechanical Engineering Boom,TG457
  14. Research on Design and Numerical Simulation of Anti-Slide Piles,TU473.1
  15. The Effect of Thermal Cycling on Damping Capacity of Aluminum Matrix Composites Reinforced with Sn-Bi Coated Al18B4O33 Whisker,TB333
  16. Microstructure and Properties of Al2O3Coated Al18B4O33 Whisker Reinforced Aluminum Matrix Composite,TB333
  17. Research on the Microstructure and Property of Joining Si3N4/2024Al Aluminum Matrix Composite,TG454
  18. Researches on Preparation and Repeated Upsetting and Extrusion of Nano-Al2O3P/2024Aluminum Matrix Composites,TB333
  19. Fabrication and Properties of Uniformly Dispersed Carbon Nanotube Reinforced Al Composites,TB383
  20. Interfacial Reaction and Hot Deformation Behaviours of Bi2O3-Coated Aluminum Borate Whisker-Reinforced Aluminum Matrix Composite,TB33

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding process > Brazing
© 2012 www.DissertationTopic.Net  Mobile