Dissertation > Excellent graduate degree dissertation topics show

Research on Thermo-mechanical Coupling of Gear Form Grinding Interface

Author: YuFei
Tutor: ZhaoDaXing;DingGuoLong
School: Hubei University of Technology
Course: Mechanical Design and Theory
Keywords: Gear Forming Grinding thermo-mechanical coupling Single grain FEM
CLC: TG616
Type: Master's thesis
Year: 2014
Downloads: 1
Quote: 0
Read: Download Dissertation

Abstract


With the increase requirement of the development of manufacturing to gear loadbearing, power transmission, transmission speed, service life and low noise,it mustimprove gear machining accuracy and hardness. Compared with generating method ofpoint contact, gear forming wheel grinding has an advantage in the processing of highhardness and improved gear precision which have a wide range of process, universalgood, it can grind various trim profile, high grinding efficiency, high profile accuracy,especially for large modulus, large tooth width, less gear teeth grinding characteristicswhich favored by the market.During gear form grinding process, accompanied by a verysmall range of high strain, high strain rate and instantaneous high temperature risingproblem which is a typical thermal coupling process and directly affects the toothsurface processing quality. Nowadays，there has been a lot of research about thegrinding force, grinding heat during the traditional way of gear grinding at home andabroad，but the research on the grinding force, grinding heat and thermo-mechanicalcoupling of gear form grinding interface is not so much.Therefore, thethermo-mechanical coupling phenomena of gear form grinding interface are analyzed,the main contents are described below:Gear form grinding force modeling. Analysis of the significance and method ofgear form grinding force, according to the gear involute nature, combined withtheoretical formulas for surface grinding force and unit grinding force, the mathematicaltheoretical models of spur gear form grinding force was established based on theanalysis of spur gear form grinding principle and geometry model which provides atheoretical and experimental basis for the field of study on gear form grinding force.The thermal model for gear form grinding temperature field. According to thecharacteristics of the temperature field of form grinding contact interface, the newthermal model for gear form grinding temperature field was established after improvedgeneral grinding temperature thermal model. Thermal burns of gear form wheelgrinding were analyzed and the corresponding preventive measures were proposed.The analysis of thermo-mechanical coupling of gear form grinding interface.Proposed the corresponding decoupling method of thermo-mechanical coupling,therefore, provides the related ideas to further analyze the thermo-mechanical couplingof gear form grinding.Finite Element Simulation of gingle grain grinding.Single grain grinding force andgrinding temperature field on gear tooth surface were simulationed and analyzed byDeform-3D.

Related Dissertations

  1. Study on Technology of Straight Bevel Gear Measurement and Error Evaluation,TG86
  2. Research on the Technology of Measurement and Error Evaluation of Gear Hob,TG721
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  5. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  6. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  7. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  8. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  9. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  10. Research on the Electromagnet Lock of Earth Fault Protection for 10kV Switchgear,TM591
  11. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  12. Load Determination of Bench Test and Fatigue Life Prediction of Motorcycle Frame,U483
  13. Deviation Calculation and Accuracy Assessment of Involute Cylinder Gear,TH132.41
  14. Research on Optimum Design of Plantary Gear Transmission Mechanism for Cutterbar,TH132.41
  15. Transient Thermal Analysis of Spiral Bevel Gear under the Condition of Dry Operation,TH132.41
  16. Dynamic Characteristics of Parallel Shaft Gear Rotor System,O347.6
  17. Research of H-beam Steel after Ultra Fast Cooling,TG335.4
  18. Non-circular Planetary Gear Kinematics and Dynamics Simulation Based on ADAMS,TH132.41
  19. Wireless Mesh Based Wireless Sensor Network Simulation and Research,TP212.9
  20. Variational Theory for Coupling and Numerical Computing in Rolling Process,TG331
  21. Control of Microstructure and Property for Gear Steel 16MnCr5,TG142.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Gear cutting and gear machine > Teeth grinding and grinding machine
© 2012 www.DissertationTopic.Net  Mobile