Dissertation > Excellent graduate degree dissertation topics show

Research on the Measurement and Simulation Methods for Transfer Impedance of Shielded Coaxial Cables

Author: WangXiaoLing
Tutor: WangLiXin
School: Harbin Institute of Technology
Course: Electrical Engineering
Keywords: Braided Coaxial Cables Transfer Impedance Calculation Method FEM Numerical Method Measurement
CLC: TM246
Type: Master's thesis
Year: 2012
Downloads: 25
Quote: 0
Read: Download Dissertation

Abstract


With the increasingly complex electromagnetic environment in the rocketengine testing system, there would be produce a variety of EMI during the experi-ment. Once these transient interference with broadband and high amplitude couplesinto the inner conductor of cable, the reliability of equipment connected with thecable will be seriously influenced. Even this will be result in abnormal work of thetesting system. So research on the measurement and simulation methods of shieldedcoaxial cables are vitally important in improving the electromagnetic compatibility ofoverall rocket engine test system, and providing theory support for developing anti-jamming equipment of testing system.Firstly, A new model is presented for the accurate predictions of transferimpedance of braided coaxial cables, from a summary study on the existing modelsproposed. The complicated responses on the braided shields due to the radiation fromthe exterior produced electromagnetic fields are taking into account in the new model.In addition, the diameter of braid is rebuilt to improve the accuracy of inductance.The formulas have a close relationship with the primary parameters of braided shield.The new model is demonstrated valid by studying against the results obtained fromthe existing models and the measurement of several braided cable samples. Then thenew model is applied to research the change rules of transfer impedance with thechange of primary parameters of shield.Secondly, research on the method of establishing finite element numericalmodel in Ansoft HFSS with the simplified structural model and approximatestructural model of braided shielded cable which are established by Pro/Engineersoftware. The validity of the method is verified by studying in several cable samples.The method solves the difficulties of the existing numerical analysis method tocalculate transfer impedance of braided shield cables which are spindly, even smalland complex in partial structure.Finally, a new method for transfer impedance measurement which based on timeresponse is proposed, and the method is made into a simple and easily useexperimental platform. The new method has some technology innovation points. First,it doesn’t need to special process to cables which guarantees the completeness ofshield. Second, it is more close to the true cable application environment by usingfield excitation than the lumped souse excitation the earlier measurement methods.Finally, it is solve the difficulty of impedance matching in the outer loop by designeda circuit to measure the characteristic impedance irregular round-planar transmission line. The validity experimental setup is verified by applied to some examples. At last,the factors influencing to improve the applicable frequency range is analyzed indetail.

Related Dissertations

  1. Research on Optical Surface Testing with Interferometers,TG84
  2. Research on the Technology of Measurement and Error Evaluation of Gear Hob,TG721
  3. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  4. High Speed Frequency Measurment and Non-Linearity Correction of Frequency Modulated Capacitive Displacement Sensor,TH822
  5. Research on the Aiming Signal Processing of the Optical Probe Measurement System,TH74
  6. Development of the On-Line Electronic Gauge for Crackshaft’s Axial Length Parameters,TH822
  7. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  8. Development of Explosion Flame Temperature Measurement System Based on Multi-Spectral Thermometry,TH811
  9. Research on Data Acquisition and Processing Methods for Weapon Evaluation System,TJ06
  10. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  11. Several Key Issues on Closed-Loop Control for Precision Laser Tracking Device,TN249
  12. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  13. Research on Visual Measurement for Spacecraft Rendezvous and Approach,TP391.41
  14. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  15. Study on Detection System of Deepwater Pipeling Pose Measuring Device,TE973.3
  16. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  17. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  18. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  19. Undersea robot plow trenching machine design and analysis,TE952
  20. Laser alignment system posture measuring device developed,TN24
  21. Axial fan blade vibration non-contact measurement,TD441.2

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Conductive materials and their products > Electrical wire and cable equipment
© 2012 www.DissertationTopic.Net  Mobile