Dissertation > Excellent graduate degree dissertation topics show

Vertical machining center Z to double drive static, dynamic analysis and optimization of performance of linear feed system

Author: YangGuoWei
Tutor: YuanJunTang
School: Nanjing University of Technology and Engineering
Course: Mechanical Manufacturing and Automation
Keywords: feed system static and dynamic characteristics finite element model experimental mode optimize
CLC: TG659
Type: Master's thesis
Year: 2014
Downloads: 25
Quote: 0
Read: Download Dissertation

Abstract


The high-grade CNC machine tools are playing an increasingly important role in manufacturing industry, which requires that Z-direction feed system of vertical CNC has a good static and dynamic characteristics. Thus, at the beginning of the design of feed system, the establishment of static and dynamic model of the Z-direction feed system is particularly important, because it can predict the static and dynamic characteristics and optimize its weak links. The paper regarded the Z-direction feed system as research object, and did research in its static and dynamic characteristics and its weak links comprehensively.Based on the Hertz contact theory, this study built the static mathematical model of feed system, and put forward calculation method and procedure which used the bisection method to solve the problems of Hertz contact theory efficiently. After studying the influence of bearing preload forces and ball screw mechanism preload forces on statics characteristic of feed system, the optimum model of ball screw mechanism and bearing preload is built, and is solved by penalty function method in the premise of knowing the design accuracy of feed system.After building finite element model of Z-direction feed system including joint surface characteristics, considering the influence of gravity and the characteristics of Z-direction feed system, the CAD model of feed system was simplified, its natural frequencies and vibration modes were analyzed, and modal test with hammering method is accomplished.According to the test results, the vibration mode of finite element analysis is almost the same with the vibration mode of modal test, and the error of the natural frequencies is within10%.As a result, the correctness and reliability of the finite element model are validated, then the harmonic response analysis was carried out on the feed system.According to solutions of finite element analysis, the weak links of dynamic characteristic of Z-direction feed system are the joint surfaces, and then the parameters of joint surface were optimized by orthogonal method. The optimization results showed that, the natural frequency of the feed system has been increased greatly, the highest rate reached10.57%;the largest amplitude of feed system in three directions has been reduced greatly. Based on the modal analysis results of feed system, the shapes of the slide were optimized, and on the premise of quality unchanged, dynamic strain was reduced by15.0%, dynamic stress was reduced by14.8%.Thus, dynamic characteristic of feed system was improved.

Related Dissertations

  1. Study on Browning Factors and Process Optimization of Casein Purified from Qula,TS252.5
  2. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  3. Motorcycle Damping System and Riding Comfort Research,U483
  4. Analysis on Static-dynamic and Fatigue Characteristics of Metallurgical Overhead Traveling Crane,TH215
  5. Modal Analysis of BIW Construction & Optimization Design in Modal Parameters,U463.82
  6. Hydraulic Support with Double-unload Protection Safety Valve Characteristic Simulation and Experimental Research on the System,TH137.52
  7. The Application Study on the Broaden Longitudinal Bridge Reinforced by the External Prestressing,U445.72
  8. Thermal Performance Calculation and Experimental Analysis of a Silicon Oil Fan Clutch,U463.211
  9. The Development and Validation of a Finite Element Human Thorax Model for Automotive Impact Injury Studies,U467.14
  10. The Optimization Study of Jiangsu Foreign Trade Structure under the Perspective of Intra-Product Specialization,F752.8
  11. The New Rural Social Endowment Insurance Practice Research,F842.6
  12. Numerical Simulation of Flow Field in Mixing Flow Pump of Double Volute and Dynamic Characteristic Analysis for the Impeller,TH313
  13. Structure Weight Reduction Research of Ship Unloader Based on Orthogonal Experiment Method,U653.928.1
  14. Composite materials by mechanical shear load connector pin load distribution of,V229.7
  15. Multilayer leather high-speed cutting machine servo feed system multi-objective optimization,TS531
  16. Scramjet engine fuel supply system solutions research,V235
  17. Study on Soil Nutrient Status and Optimize Fertilization in Qingan County,S158
  18. Application of Simulation and Optimization in Tongkuangyu Copper Flotation Process,TD952
  19. Research on Recombination of Production Series of Strata to Improve Water Driving Developing Effect in North 2 East,TE357.6
  20. Study on Fermentation, Separation, and Characteristics of β-D-galactosidase,TQ925
  21. Study of Detecting Aircraft Skin Joint Based on Structured Light Vision,TP391.41

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile