Dissertation > Excellent graduate degree dissertation topics show

The Preparation and the Characteristic Analysis of Electrochromic Fabric Based on Polyaniline

Author: ZhangQiuPing
Tutor: LinLanTian
School: Shanghai University of Engineering Science
Course: Fashion Design and Engineering
Keywords: electrochromic polyaniline copper coated fabric device structure characteristic analysis
CLC: TS106.6
Type: Master's thesis
Year: 2013
Downloads: 2
Quote: 0
Read: Download Dissertation

Abstract


With the development of science and technology, intelligent textile is not only inthe conception but also quickly into the practical phase. They are widely applied tothe information, energy, electronic, military, daily life and other areas. Electrochromicfabrics can be developed when combined with electrochromic technology, which canbe widely used into all kinds of intelligent textile with color response behaviour.Electrochromic fabrics will bring great academic and industrial value. At the sametime, they will promote the development of the intelligent materials.Polyaniline will be prepared as the color-changed material. And it will bediscussed about its conductive and doping mechanism, the synthesis procession aswell as coating composite skill; Copper coated fabric is the cathode material ofelectrochromic device, if it is combined with polyaniline, electrolyte and conductivepole, electrochromic fabric will be obtained in a form of flexible electrochromicdevices in good conductivity and excellent electrochromic. The preparation andperformance of each layer will also be researched.When the working voltage ischanged, the phenomenon and behaviour of electrochromic fabric also change. One ofthe most important job of this article is to character the morphological structure, testand analysis various performance of the electrochromic fabric. The synthesisprocession of polyaniline, coating technology, structure design, choice of conductivefabric and encapsulation procession all have great influence on electrochromicfabric.The paper consists of four parts:1) Polyaniline emulsion is made by the method of chemical polymerization. Theoptimum reaction conditions is the molar ratio n （An/DBSA/APS）=1:1.5:1.5and the reaction temperature is from10to15℃resulted to the experiments. Then, it will becoated on the ITO conductive films in order to investigate polyaniline electrochromicperformance when put in the0.1mol/L HCl solution. Circulation current-voltagecurve shows that,the structure of polyaniline occurs from reduction state to oxidationstate with the rise of voltage between-1.51.5voltage range. and at the same time,colors of it change from yellow to green and then to blue.2)Electrolyte is an important part of the electrochromic device, and it conductsion and blocks electronic between electrochromic layer and ion storage layer.GPEbased on PMMA has high conductivity, specular transmittance, stablethermodynamics and electrochemical performance etc. When PMMA is dissolved inLiClO4-PC solution, transparent and uniformity gel will be obtained at roomtemperature, and the ion conductivity is0.692×10-3S/cm. High molecular weight willnot only improve the viscosity of the gel but also can keep high conductivity, highestcontent of PMMA is around23%.3) Flexible electrochromic device has wider prospects compared with traditionalelectrochromic device. However, the selection of flexible transparent electrodes andthe packaging of each material restrict its preparation and application. ITO conductivefilm would be chosen as transparent conductive layer, polyaniline used aselectrochromic layer and ion storage layer, and PMMA based gel electrolyte appliedas ionic conduction layer for the preparation of the symmetric structure flexibleelectrochromic devices. Series of electrochemical performance testing such as theelectronic scanning electron microscopy （SEM）, ultraviolet spectrum, circulationcurrent-voltage and electrochemical spectrum etc would be devoted into theexperiment.4) Electrochromic device （ECD） generally has five layers. Two transparentconductive layers are located in the outside, electrochromic layer and ion storagelayer are the times outer, ionic conduction layer is in the middle of ECD.Electrochromic fabric can be prepared when one of transparent conductive layer isreplaced by conductive fabric and the structure of ECD is designed anew. Conductivefabric is flexible, lightweight and wearable as ECD cathode. Copper conductive fabric will be used as cathode material in the ECD, and polyaniline electrochromic fabricwill be obtained in the experiment. Series of electrochemical performance testingwould be devoted into the experiments.

Related Dissertations

  1. The Research on the Architectural Adumbral Method of Building,TU226
  2. The Preparation of Polyaniline-Metal Complex and the Study on Its Catalytical Property,O634
  3. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  4. Preparation and Property Study of Polyaniline/Polyester Composite Conductive Fabric,TS195.6
  5. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  6. Polyaniline / short fiber reinforced natural rubber properties,TQ330.1
  7. SnO 2 / CNTs composite Controllable Preparation and Gas Sensitivity Study,TB383.1
  8. Preparation and Properties of WO3 and NiO Complementary Electrochromic Films and Device,TB383
  9. Preparation and Optical Properties of PS/QDs Nanofibers and Tungsten Oxide Nanofibers,TB383.1
  10. Structural Control of Hierarchical Porous Carbon and Its Composites and Their Electrochemical Performance,TM53
  11. Fabrication and Properties Studies of Cu-doped NiO Electrochromic Thin Films,TB383.2
  12. Characteristics Analysis of Salinization in the Oasis Based on RS,S156.4
  13. Composite Supercapacitor Electrode Materials Preparation and Properties,TM53
  14. Analyze on Internet Public Opinion Main Body Characteristic and Origin Reason,G206
  15. Southwest Aviation Safety Analysis System management features,F562
  16. One-dimensional Core-shell Structured Multi-walled Carbon Nanotubes/Polyaniline Nanocomposites,TB383.1
  17. A1 -based Pb-PAN composite coatings electrodeposited Preparation and Properties,TQ153
  18. Research on Silicon Based Anode for High Capacity Lithium Ion Batteries,TM912.9
  19. Investigations on Basic Characteristics of Atmospheric Particles of Open-Sources,X513
  20. Study on Temperature Field and Shape Control for Plate Roller Quenching Machine,TG155.3
  21. Preparation of Nano-Cobalt Oxide and Its Electrochemical Composition with Polyaniline,TB383.1

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Blended fabric > Industrial fabrics
© 2012 www.DissertationTopic.Net  Mobile