Dissertation > Excellent graduate degree dissertation topics show

The Research on Preparation Technology of CoFe2O4Nanoparticles via Microwave-assisted Ball Milling

Author: YiXiang
Tutor: ChenDing
School: Hunan University
Course: Materials Processing Engineering
Keywords: Cobalt Ferrite Aqueous Ball Milling Microwave Chemistry Mechanochemistry Nanoparticles Magnetic Materials
CLC: TB44
Type: Master's thesis
Year: 2013
Downloads: 14
Quote: 0
Read: Download Dissertation

Abstract


As a spinel efrirte material, CoFe2O4exhibits excellent magnetic properties includingmoderate saturation magnetization, strong anisotropy and high coercivity at room temperature,as well as good chemical stability, however, its preparation process tend to be complicated,easy to introduce impurities, and the performance of the ifnal product is diiffcult to guarantee.The research on the inlfuence of microwave to the preparation of cobalt ferrite was carired outby milling COC2O4·4H20,2CoCO3·3Co（OH）2·H2O and Co2O3in aqueous solution using smallmilling balls. The impact of mateiral of grinding ball, ratio of grinding media to mateiral andraw material on the preparation process of microwave-assisted ball milled for cobalt ferritepowder and the products’ performance have been studied. The results were listed as follows:1.Researches showed that:Ellipsoidal cobalt cobalt particles were directly synthesized atlow temperature of <100°C in60h，without the need of calcination, via microwave-assistedaqueous ball milling technique using COC2O4·4H20as raw material and small iron balls asmilling balls, and the average particle size of cobalt ferrite powder is40.07nm, and themagnetic saturation intensity is52.05emu/g. However, only only a part of the CoFe2O4andaccompanied by a large amount of residual CoC2O4were obtained when COC2O4·4H20milledwithout microwave assistance for60h. Pure CoFe2O4pHase was also obtained bymicrowave-assisted aqueous ball milling technology using CoC2O4.4H2O and Fe powder asraw materials and small stainless steel balls as milling balls in40h，and the average particlesize of cobalt ferrite powder is33.68nm, and the magnetic saturation intensity is82.09emu/g.The reaction was much faster than the milling process with COC2O4·4H2O as raw mateiral andsmall iron balls as milling balls. This is because COC2O4·4H20and Fe sources could be mixedifilly when Fe powders were used, which increased the contacting area and accelerated thereaction.2.Fiulher studied on the inlfuence of different ball material ratio on cobalt ferritepreparation process and the property of products Intermediate products.lt turned out that:generated after12h of microwave-assisted ball mill aqueous solution, With stoichiometricratio2CoCO3·3Co（OH）2·H2O+Fe powder （20g） as raw materials, Small stainless steel （1000g）as girnding balls, Pure CoFe2O4was obtained when the milling time last to48hours, theaverage particle size of cobalt ferrite powder is30.26nm，and the magnetic saturationintensity is62.07emu/g. How ever, the products were the mixture of CoFe2O4and CO3CO4when2CoCO3·3Co（OH）2·H2O+Fe milled without microwave for80h. The products were alsothe mixture of CoFe2O4and CO3CO4when2CoCO3.3Co（C）H)2.H2O+Fe powder （30g） via 50h’s microwave-assisted aqueous ball milling using Small stainless steel balls （1000g） asgirnding balls.Finally has carried on the study of preparation of nano cobalt ferrite powders by usesmall ball as grinding balls, the stoichiometric ratio of Co2O3and Fe powder mixture as rawmaterials. Analyzed the preparation process and the prod’ucts performance of CoFe2O4prepared imder the same technology condition but the raw mateiral is different. It turned outthat: Pure CoFe2O4was obtained when Co2O3ball milled with microwave assistance for48husing Small stainless steel balls. However, the Crystal structure CoFe2O4is imperfect, theaverage particle size of cobalt ferrite powder is34.37nm，and the magnetic saturationintensity is33.75emu/g. From the compairng we can ifnd that, we can get pure cobalt ferriteefstest by use Co2O3+Fe as raw materials and the CoFe2O4with the most perfect crystalstructure and excellent magnetic property prepared by use CoC2O4·4H2O+Fe as raw materials.

Related Dissertations

  1. Electroporation Assisted Surface-enhanced Raman Spectroscopy for Living Cells,R318.51
  2. Study on Electrochemistry and Raman Spectrum of Picoline Electro-Oxidation Beavior in Non-aqueous System,O626.321
  3. Inorganic filler of the modified polylactic acid,TQ320.1
  4. Cyclodextrin -modified magnetic nanoparticles synthesis and study drug carrier,TQ460.1
  5. Nano LaFeO 3 Controllable Synthesis and TiO 2 bridged construct composite photocatalyst,O643.36
  6. Study on the Effect of Gold Nanoparticles in the Immunological Response Induced by Lipopolysaccharide,R318.08
  7. The Synthesis of Luminescent Magnetic Nanoparticles and Their Applications in Bioanalysis,TB383.1
  8. Detection of Avidin from Egg White Based on Magnetic Nanoparticles,TS253.1
  9. Fabrication of a Uniform Surface Enhanced Raman Scattering Substrate and Its Application,O657.37
  10. Studies on the Application of Graphene Modified Electrodes in Electrochemical Biosensors,O657.1
  11. Templated Synthesis of Surface Enhanced Raman Scattering Substrate and Its Application,O657.37
  12. Preparation and Characterization of Poly(ionic Liquids)/Pt Nanoparticle Hybrids,O643.36
  13. Preparation and Evaluation of CEC Monolithic Column Incorporating Nanoparticles,O657.7
  14. Multifunctional Magnetic Nanoparticles Used for EPR Bio-probes,TB383.1
  15. Preparation and Characterization of Novel Chitosan Bearing Pendant Cyclodextrin Nanoparticles for Drug Delivery,R944.27
  16. Preparation and Catalysis of Supported Palladium Nanoparticles Catalyst for Hydrogenation of 2-tertiary Butyl Anthraquinone to Produce H2O2,TQ123.6
  17. Layer-by-layer Assembly of Nanoparticles for Surface-enhanced Raman Spectroscopy Substrate and the Application in Detection of Organic Molecules,O657.3
  18. Adriamycin - folic acid nanoparticles tongue carcinoma Notchl mRNA, WT-P53mRNA expression,R739.86
  19. Synthesis of Poly(Ethylene Glycol)-b-poly (γ-amino-ε-caprolactone) and Its Application for Drug Delivery,O631.3
  20. Design, Preparation and Perfermance Study of Controlled Release Systems Based on Mesoporous Silica Nanoparticles(MSNs) and one Sensor for Lithium Ions,TP212
  21. Study on the Sensing Interfaces Fabrication of Electrochemical Impedance Immunosensor and the Application for the Detection of Polycyclic Aromatic Hydrocarbons,TP212.2

CLC: > Industrial Technology > General industrial technology > Industrial common technology and equipment > Powder technology
© 2012 www.DissertationTopic.Net  Mobile