Dissertation > Excellent graduate degree dissertation topics show

Research on Design and Optimal Matching of the Buffer Made in Polyurethane

Author: LiYunPeng
Tutor: LiWeiJia
School: Huazhong University of Science and Technology
Course: Naval Architecture and Ocean Engineering
Keywords: polyurethane buffer simulation optimal matching
CLC: TB535
Type: Master's thesis
Year: 2013
Downloads: 11
Quote: 0
Read: Download Dissertation

Abstract


The buffer made with polyurethane is widely used in light industry，automotiveindustry and mechanical industry especially in the electric cylinder of small and mediumsizes because of its compact structure，economics and process ability convenient. Theresearch project presented in this paper aims at studying the process of the buffer andoptimizing its size.This paper was arranged into three distinct sections. Firstly, the properties ofnonlinear material and the constitutive relation of the polyurethane were analysed, aboveon which the compression and shear tests of the polyurethane material were conducted todetermine its physics parameters. Then the mechanical tests of polyurethane material weresimulated in the finite element simulation software ABAQUS by input the parametersobtained from the mechanical tests. The parameters were proved to be correct by thetestimony of the result of the simulation and the mechanical tests.Then buffers of differentsizes with practical condition were simulated. During the simulation,the maximumdeceleration of the mass block in models with different sizes of polyurethane bufferswere obtained. Lastly, The sizes of the buffer with minimum volume which is agreed withthe request of the maximum deceleration of the mass block is obtained by data handling，above on which an database was built. The goal that getting the optimal sizes of the bufferby simply inputting the restricted condition such as the load with a program compiledbased on VC++was achieved.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Industrial Technology > General industrial technology > Acoustic engineering > Vibration, noise and its control > Vibration and noise control and its use
© 2012 www.DissertationTopic.Net  Mobile