Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation on Silica Gel Watet Adsorption Chiller System

Author: GaoXiaoYan
Tutor: LiBingXi
School: Harbin Institute of Technology
Course: Thermal Power Engineering
Keywords: finned heat pipe porosity coefficient of performance cooling power numerical simulation
CLC: TB657
Type: Master's thesis
Year: 2012
Downloads: 50
Quote: 0
Read: Download Dissertation

Abstract


The whole world is suffering the energy crises and environmental issues, whichleads air conditioning and heat pump industry to look for new refrigerants and newrefrigeration technology. Compared with conventional vapor compression refrigerationtechnology, adsorption refrigeration systems have advantages of energy saving andenvironment friendly. Therefore adsorption refrigeration has become a new focus inrefrigeration technology.Based on a two-bed silica gel-water adsorption chiller, in this thesis mathematicalmodels on finned heat pipe adsorption bed, condenser and evaporator are respectivelyestablished to modeling the adsorption system. In order to analyze both the hea t andmass transfer characteristics of adsorption bed and the dynamic characteristics ofadsorption system, computer code is written by Fortran language. The main results inthis thesis include as follows:(1) Based on the mathematical model of adsorption bed, the process of heat andmass transfer is analyzed. The results show that the effectiveness of fin temperaturedifference on both temperature field of adsorption bed and the uptake of adsorbentincreases with the increase of fin length.(2) According to the mathematical model of adsorption bed, the adsorptionprocesses of different porosities in silica gel particles are analyzed. The results showthat the average uptake and the total uptake of adsorber both reach proper values whilethe porosity of particles among0.4~0.45.(3) The dynamic processes during the operation of the two-bed silica gel-wateradsorption system are researched, including the temperature field of adsorption bed,average temperature, average uptake, average pressure and the temperatures of fluid incondenser and evaporator. The influences of hot source temperature, inlet temperatureof cooling-water, evaporating temperature and cycle time on the performance of systemare also predicted. The results show that among those parameters studied above thecycle is the most important factor to COP, while the hot source temperature and inlettemperature of cooling-water have significant impact on SCP and cooling capacity.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Recycled aggregate semi- rigid concrete preparation and molding of test,TU528
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > General industrial technology > Refrigeration Engineering > Refrigeration machinery and equipment > Refrigeration Equipment
© 2012 www.DissertationTopic.Net  Mobile